UNSOLVED

catchxps

updated

19 years ago

C

catchxps

45 Posts

0

5359

June 18th, 2007 17:00

Raid config on new mobo

Hi,
 
My mother board in my 710 just died.  Dell has a guy coming out to replace it.  I am assuming that the RAID config is stored in the controller ROM on the motherboard. 
 
I have 4x 500gig drives.  Two of them are in a RAID 0 array, the other two are in a RAID 1 array. 
 
My question is, after the new mother board is installed, how will it know what the RAID config is? 
 
I don't really care about the about the RAID 0 as this is only my operating systems and some files that I have been working on.  I only care about the RAID 1, as it has all of my data on it.
 
Just don't want to have the tech get here and then blow away both arrays and lose about 350gig of irreplaceable data.  I know, I should have had external backups, and was going to once I get my backup drive.  But I figured having a mirrored drive would do well until I get the cash for a backup.
 
Any feedback much appreciated.
  • catchxps

    45 Posts

    245

    0

    Posted June 18th, 2007 20:00

    Well, I figured it out the hard way.
     
    The tech arrived, and fought with the power supply for 30 minutes.  I knew it wasn't the power supply, everything powered on but nothing would happen, even the diagnostic lights wouldn't come on, which made me think mother board.  After he admitted defeat on the power supply (which he guaranteed me was the problem to start), he started on the mother board.  I have to tell you, I felt totally molested, sitting there watching how he handled the CPU, the memory sticks, and the video cards.  I'm old fashioned, I use a static band.  But if I can't, I don't lay things down on a carpet, the same carpet I am sitting on rubbing my legs on, generating static electricity.  Fine, he didn't shock anything.
     
    To the point, he put everything back together, and totally didn't pay attention to which drive came from where.  After the mobo replacement, he powered it on, and it booted up, posted bios, but then said operating system not found.  He response was that he doesn't believe in RAID on desktop/workstations.  Yeah, whatever pal, get the H-E- double hockey sticks outta here, I want my data in tact.
     
    Switched the cables around until finally it was booting up on the 2 striped drives where the OS was.  However, the RAID ROM utility was reporting each of the 500 gig drives that were mirrored as separate arrays, and each was listed as "degraded".  I booted into the OS, both drives were visible as sepate drives, each having all of the identical data.  I rebooted, hit Control N to go into RAID ROM, deleted one of the arrays, then selected the remaining mirror array, clicked rebuild, then added the spare drive back to it.  Its now rebuilding it, and all data is fine.
     
    Note to Dell.... If you are going to sell computers with technology, you should probably make sure that 3rd party companies that you outsource your support to (the nights and weekends onsite that I paid a bundle for) you should probably make sure they know the technology.  This guy was b!tching about the only problem he has seen on a 710 was a video card problem, and he was 100% sure my problem was a power supply or video.  The only reason he finally did the mother board is because I compelled him too.  I think if I have the choice next time, I'll ask support to send me the parts.  I can do it, but hey, I paid for the support and thought I'd give it a try.  Never again.
     
    So that was the 3rd party guy.  As for the guy who I called initially, XPS support, I don't remember his name, but he was a dell guy, or appeared to be, and knew exactly what I was looking at and very knowledgefull in terms of the box itself.  The problem with this support experience was the tech that did the onsite visit, not the guy at the 800 number.  Too bad he didn't show up to fix the problem :-P.
     
    Anyway, not sure why, but in the end, the RAID 0 Array showed up fine, after I plugged the correct SATA cables into the right drives.  Regardless of where the cables were connected for the other two RAID 1 drives, they showed up as two separate arrays, both showing as "degraded"  Deleting one of the arrays and then rebuilding the remaining array did the trick.
     
    So happy to have my rig back up and running.
  • TomXPS

    1310 Posts

    245

    0

    Posted June 19th, 2007 22:00

    I agree with you Dell should really have better tech, that what you had.   Sound very foolish that he would not mark the cable and disk drive locations.  This should be standard procedure, also understanding how the RAID Configuration is stored would be useful.    The RAID 1 usually is not a problem but the RAID 0 could of been lost, guess you got lucky.
     
     
  • MoneyGuyBK

    2 Intern

    •

    2294 Posts

    245

    0

    Posted June 30th, 2007 02:00

    hi CatchXPS
     
    I have been reading your post since you started, as I am very interested in the pros and cons of RAID... Love them and since I don't have enough know-how, a bit afraid of them too!!!
     
    I am glad all went well for you....
     
    I agree, Dell is great with sales, customer and tech support; but gotta watch those third-party guys they send over.
     
    Good Luck
     
    Peace