I have a Dimension 3000, Windows XP Professional, upgraded with 2 GB Ram... I installed into my computer a Pioneer DVD-RW DVR 105, which should read DVD-R @ 6x, and write DVD-R @ 4x-- but instead read and write no faster than 1x. This Pioneer, on another computer I have, ran normally. Ok, I wasn't sure why I had that problem with the Pioneer DVR-105 on this Dell, and I wanted to upgrade to a faster DVD burner anyway, so I replaced it with a 16x Pioneer DVR-109 Dual Layer Burner, and it also just read and write at only 1x and no faster. I went to the Pioneer website and installed the latest drivers for it, and still, not resolved. Can someone help me fix this problem I have...I have no clue.
First off, thanks for responding...
but what is that(PIO/DMA) and where do I go set this configuration? I'm sorry, think of me as a newborn with computers.
Select Transfer Mode: DMA if Available. If that does not help, consider switching the two drive positions on the IDE cable so as to make the DVD burner the Master (end of cable) and the
other drive the Slave middle of cable). Both drives should be
Be sure both drives are jumpered CS, Cable select. The other thing to do is to enter system setup (F2 at the Dell screen on start up) and check the drive configuration menu to see if both the devices on the secondary IDE are set to auto in the drive type.
Message Edited by crossman1 on 07-02-2005 03:38 PM
crossman1
19 Posts
576
0
Posted July 2nd, 2005 14:00