Need help deciding on enclosure for Ultra ATA/100 HDD
My PC is currently inoperable, but I believe the hard drive is still ok. I've been looking for a hard drive enclosure online, but wasn't sure which one I should get, since my computer and ATA hard drive is fairly old. According to the purchase receipt, the hard drive is 60GB Ultra ATA/100 HDD 7200RPM. How do I know if i need a 2.5" enclosure vs. a 3.5" enclosure? Are enclosures for SATA drives "backwards compatible" (if that even pertains here, don't know very much) with ATA drives? From searching these forums, I've found that it's good to get a metal enclosure to help dissipate heat and also it might be preferable to get one with an AC power outlet, which might be more expensive. However, I think my little ol' 60GB hard drive might be fine with just the usb power. Any suggestions?
I have some of the enclosures. You'll need at least a 3.5" enclosure, but it is a very tight squeeze. You can also buy a 5.25" enclosure, which are meant for CD/DVD drives but will work.
SATA drives are NOT backward compatible. Completely different animal altogether. However, there are some enclosures that are compatbile with both SATA and IDE.
I like buying from newegg.com because they treat their customers very well. The Vantec's (such as N82E16817145133) get very high reviews.
Personally, I would use the VANTEC Nexstar 3 NST-360U2-RD Aluminum 3.5" USB 2.0 External Enclosure.
The VANTEC NST-530U2 seems to be for 5.25" optical drives and does not say that an 3.5" drive can be installed.
There is no switch, there is a small 'Jumper' that fits over two pins, located next the power connector. A list of the settings should be on the label/case of the hard drive.
THIS will show the location of the jumpers on an IDE hard drive.
Yes, Dell use the 'Cable Select' setting and before reinstalling the hard drive, you would need to revert it back to 'Cable Select'.
ieee488
6 Operator
•
11126 Posts
•
38371 Points
2133
0
Posted December 31st, 2009 10:00
I have some of the enclosures. You'll need at least a 3.5" enclosure, but it is a very tight squeeze. You can also buy a 5.25" enclosure, which are meant for CD/DVD drives but will work.
SATA drives are NOT backward compatible. Completely different animal altogether. However, there are some enclosures that are compatbile with both SATA and IDE.
I like buying from newegg.com because they treat their customers very well. The Vantec's (such as N82E16817145133) get very high reviews.