UNSOLVED

percuno

updated

22 years ago

P

percuno

12 Posts

0

15311

March 27th, 2005 00:00

Inspiron 4100 Dell-branded 16X CD-RW/DVD - Need a DOS driver

Anyone know where I can get this? I want to dual-boot my laptop, and I always install the 'older' OS first, but I can't install Win98SE without a bootdisk (my win98SE disk is an 'upgrade' disk, not a 'clean install' version).
  • Skybird

    1 Rookie

    •

    10871 Posts

    679

    0

    Posted March 27th, 2005 00:00

    Try one of these bootdisks .............
  • percuno

    12 Posts

    679

    0

    Posted March 27th, 2005 01:00

    Been there, done that, the Win98 boot disk was created 5 years before this CD-RW/DVD drive even existed, so it's no surprise that it doesn't work.
  • Skybird

    1 Rookie

    •

    10871 Posts

    679

    0

    Posted March 27th, 2005 01:00

    It does not matter when it was created.  Works for everyone else.
    What about it does not work for you?
     
     
     
     
     
     
     
     
     
     

    Message Edited by Skybird on 03-26-2005 08:17 PM

  • percuno

    12 Posts

    679

    0

    Posted March 27th, 2005 05:00

    The CD-ROM drivers do not recognise the CD-RW/DVD drive.
  • jerry6

    15 Posts

    679

    0

    Posted March 31st, 2005 15:00

    you can if you have an old 95disk , full or upgrade , just pit it in when it asks for verification
  • percuno

    12 Posts

    679

    0

    Posted March 31st, 2005 18:00

    The drivers included in a standard Windows 95, Windows 98, Windows 98 Second Edition or Windows Millennium Edition disk do not work with this CD-RW/DVD drive, on this computer. If they did, I would know, as I have tried every single one of them, and would not be looking for real-mode drivers for the device. However, I found a way around it with much weeping and gnashing of teeth (figurative biblical paraphrase for those who don't "get it").

    In case anyone else comes up against this problem, this was my eventual solution, adapt as necessary to your situation an preference:

    1) Boot with XP CD and partition as per your preference (this can also be done with a Linux boot CD).
    2) Boot with a standard Windows 98 boot floppy and format the C drive as FAT32 using the /S switch to transfer the basic "DOS" boot files.
    3) Install XP on another partition.
    4) In XP, copy the Windows 98 install files from the WIN98 directory (folder, for the Command-Line Challenged) on the CD to C:\WIN98 (or whatever you want to call it). If your 98 CD is an upgrade version, also make a c:\WIN95 directory and copy the files from the WIN95 directory on your Windows 95 CD over.
    5) Boot into "DOS" on the C drive and type C:\WIN98\SETUP to begin a Windows 98 install. (Note: This will mess up your MBR but is fixed in the next step).
    6) Boot with the XP install CD, DO NOT use the recovery console unless you really know what you are doing, skip past that and then tell the install program to do a Repair.

    It's a royal pain in the behind; however, it gets the job done if you absolutely have to use a Windows 98/XP dual boot. In this case I do, as I am giving the computer to my daughter for school work and games, and many of her older games do not work at all under XP. I'll be glad when she's 12 and can handle a real operating system like Linux.