UNSOLVED

admiralj

updated

23 years ago

A

admiralj

109 Posts

0

6573

January 20th, 2004 14:00

How to boot from Promise Ultra133TX2 PCI Card? Dimension 8100. XP2 Bios.

How to boot from Promise Ultra133TX2 PCI Card? Dimension 8100. XP2 Bios.

I see NO option in the bios for boot from scsi/ide card or anything. Absolutely NONE. Help.

  • Warren H.

    501 Posts

    373

    0

    Posted January 20th, 2004 18:00

    admiralj,


    In your Bios, under Boot Devices, do you have a listing for "Option ROM" ?



    Take a look at this THREAD, and pay particular attention to Timdrouilard's fourth reply. Even though the thread deals with a B600r, you situation could possibly be similar.

    My HomePage

  • admiralj

    109 Posts

    373

    0

    Posted January 20th, 2004 18:00

    I do not have the card yet. I do not want to buy it if I cant use it. I heard on futuremark that there is no way for a dell to boot off of a card... That is really sad if it is true, I didn't spend $3600 on a computer that I couldn't upgrade. That is sad because a $399.99 emachine can do it...
  • Warren H.

    501 Posts

    373

    0

    Posted January 20th, 2004 19:00

    How do you expect a card to show in the bios, if you don't have it installed ? Sounds like your getting all bent out of shape before you even start. I haven't heard of anyone not being able to install a ATA PCI card in a Dell . Bookmark my link and save it for when you do get around to installing it. Betcha it'll come in handy. Have a nice day.

    My HomePage

  • admiralj

    109 Posts

    373

    0

    Posted January 20th, 2004 20:00

    Hey, Thanks for your reply. Yes, I do not have the card, but I am also very computer smart. I have an MCSE, A+, and Network +, I have also been doing computers since I was 6. Every BIOS I have EVER worked with has had an option under boot devices for "SCSI/IDE CARD." This Dell BIOS has it nowhere. It shows up after you add the card or something? I am looking under "BOOT SEQUENCES" in the bios, but there it isn't very helpful. I am putting the card in right now, I went to the store and bought one. I will brb.
  • admiralj

    109 Posts

    373

    0

    Posted January 20th, 2004 22:00

    No go. Same problem i predicted. I called Promise, turns out Dell CONSUMER computers can't boot off of PCI ide cards. Oh well, waste of cash =/
  • Warren H.

    501 Posts

    373

    0

    Posted January 21st, 2004 15:00

    See how these 8100 owners got their cards to work.


    #1

    #2


    #3


    #4

    My HomePage

  • admiralj

    109 Posts

    373

    0

    Posted January 23rd, 2004 01:00

    I got it to work!  Ok, I took EVERYTHING off the onboard IDE, and only put the hard drive on the promise controller, then I did the ALT E F B bios reset thing, and then it booted off the hard drive off the card on next reboot. Auto configured it. Then I used the links and information above to configure the rest of it, is working good now.

    Thank you everyone!

  • rickmktg

    2 Intern

    •

    11898 Posts

    373

    0

    Posted January 23rd, 2004 01:00



    @admiralj wrote:
    No go. Same problem i predicted. I called Promise, turns out Dell CONSUMER computers can't boot off of PCI ide cards. Oh well, waste of cash =/


    That's total BS.  MY B600r boots fine off the card, as did my D333, as does my XPS.  All of them boot just fine.

    The B600r boots exactly as was explained to you earlier, using the Option ROM.  You should stop predicting failure and listen to people's suggestions.

  • rickmktg

    2 Intern

    •

    11898 Posts

    373

    0

    Posted January 24th, 2004 12:00



    @admiralj wrote:

    I got it to work!  Ok, I took EVERYTHING off the onboard IDE, and only put the hard drive on the promise controller, then I did the ALT E F B bios reset thing, and then it booted off the hard drive off the card on next reboot. Auto configured it. Then I used the links and information above to configure the rest of it, is working good now.

    Thank you everyone!

    Glad to have helped, but you didn't need to reset the bios.  As you've discovered, people on this forum often know more than support staff at places like Promise