UNSOLVED

media49

updated

18 years ago

M

media49

1 Message

0

74304

April 16th, 2009 22:00

How do I add a 2nd HDD to a Dell Dimension 5150

I need to upgrade my Dimension 5150 (UK model) by adding a 2nd HDD and would like to know the following please:

1, What is a good make?

2. What size HDD could I install?

3. Is the computer configured to SATA or SATA 2?

4. Do I leave my original HDD (with the operating system - Vista) where it is and add the 2nd drive as a slave?

5. What size cache should I buy: 8MB, 16MB or 32MB?

If anyone could help I would be most grateful - many thanks.

Media49 

  • shesagordie

    12 Elder

    •

    46017 Posts

    1004

    0

    Posted April 17th, 2009 14:00

    media49

    1. Western Digital.

    2. Any currently available SATA hard drive is supported.

    3. SATA-1, but SATA-2 hard drives can be installed as they are backwards compatible.

    4. You leave the primary hard drive, with the operating system connected to SATA-0 on the motherboard, as is and connect the additional hard drive to the motherboard SATA-2 connector.

    Remember to check the system setup, to see if the SATA connector the second hard drive is connected too, is Enabled [on]

    Note. With SATA there are no Slave/Master settings, like IDE drives, but, the primary 'Boot' hard drive must always be connected to the motherboard SATA-0 connector.

    5. Either 16mb, or 32mb.

    Bev.

     

  • abdult3

    11 Posts

    1009

    0

    Posted July 13th, 2009 12:00

    I am trying to retrive data from the 2nd sata drive I configured it as Drive 1 and I have a good SATA drive as drive 0 and I can see it on my BIOS under my Drives but the cOptiplex GX280 tries to boot from drive 1 which the bad drive I can't understand why. From Boot Sequence menu in Bios I have CD/ROM and then SATA (it said installed at first and after the installing the 2nd drive it say not installed) I do have the most updated BIOS version. Thanks in advance for any suggestions.

  • shesagordie

    12 Elder

    •

    46017 Posts

    1009

    0

    Posted July 13th, 2009 13:00

    abdult3

    Try making the SATA Drive 0, the first boot device.

    Did you replace the hard drive in the GX280 and reinstall windows?

    Bev.

  • abdult3

    11 Posts

    1009

    0

    Posted July 13th, 2009 15:00

    I took the bad SATA drive with XP Pro (making clicking sounds and the error Boot Device Not Found) from a GX280 and installed it as a 2nd Sata drive1 in a different GX280 with Xp Pro which also has a SATA drive0 and I configure th BIOS to Drive1 on but when I reboot the computer I get an error saying boot device not found hit F1 to continue or F2 for setup. When I go to setup I see both the SATA drives but when I go to Boot Sequence menu it says that there are no SATA drives Installed. I unplugged the bad drive and it boots normally from Drive0. I am hoping if I can boot he computer with bad drive as a secondary drive then I maybe able to retrive data that is if it is not a harware failure. I booted with the GX280 driver/tool cd and tried to run Hard Drive diag and it could not find the drive and the repair failed too from the XP cd. Do you think if it is not a HW failure I am on the right track trying to run the 2nd SATA drive and retrieve data. I know there is no Master/Slave in SATA. What r my other options besides taking it to the data restore place and big bugs? Thanks so much for your help.

  • shesagordie

    12 Elder

    •

    46017 Posts

    1009

    0

    Posted July 13th, 2009 16:00

    abdult3

    Looks like the 'Bad' hard drive is toast, you would seem to be out of luck, with recovering the files and folders yourself and require the services of a data recovery company.

    Bev.

  • abdult3

    11 Posts

    1009

    0

    Posted July 14th, 2009 11:00

    I think so too. That's too bad this person did not back up his stuff. Have you ever taken a hard drive a part and try replacing the hardware from another good drive? I have another identicle drive and may give it a shot since they are 5 years old I am not going to put it back in production. I will keep you updated. Thanks for your help. Take care! 

  • shesagordie

    12 Elder

    •

    46017 Posts

    1009

    0

    Posted July 14th, 2009 11:00

    abdult3

    You are welcome.

    "That's too bad this person did not back up his stuff'". Guess that's one lesson, that must learnt the hard way.    :emotion-4:

    Sorry, never have yet, replaced the hardware in a hard drive.

    Bev.

  • lsuedulive

    1 Rookie

    •

    29 Posts

    1009

    0

    Posted January 7th, 2010 07:00

    Im having a similar problem adding a 2nd HD (Sata)

    Is there a Dell Utility you recommend ?

    Thanks

  • shesagordie

    12 Elder

    •

    46017 Posts

    1009

    0

    Posted January 7th, 2010 13:00

    Im having a similar problem adding a 2nd HD (Sata)

    Is there a Dell Utility you recommend ?

    Thanks

    lsuedulive

    If your system is a Dimension 5150 and using XP.

    Maybe the following can help, if not please describe the problem with installing a second SATA hard drive.

    How to add an additional SATA hard drive to the E510.

    There should a spare SATA power connector inside the CASE, either P3 & P5, connect the data cable to the motherboard connector SATA2

    For the hard drive installation instructions, go HERE  <ADMIN NOTE: Broken link has been removed from this post by Dell>.

    You will need a 22" [or longer] x 180* x 90* [right angle] SATA data cable, similar to THIS

    After the internal hard drive is installed, enter the setup and check that the drive is set to auto [on]. In order for windows to recognize the second hard drive, it must be partitioned and formatted.

    THESE are generic instructions for installing an additional hard drive using Windows XP Disk Management, they are by Seagate, but apply to all brands.

    Bev.

  • lsuedulive

    1 Rookie

    •

    29 Posts

    117

    0

    Posted January 8th, 2010 05:00

    I had added a 2nd HD but XP did not see it.

    I thought the HD or Cable was bad and a Dell Utility would troubleshoot the hardware.

    But it was the BIOS.  After the settings were changed it all worked well.

    Thanks for the quick response