UNSOLVED

stephy2483

updated

19 years ago

0

5262

July 28th, 2007 01:00

failure to boot from cd

Okay I am back. LAst week I had to restore my factory settings on Dimension Desktop L433c and everything seemed to be working okay after installing a fresh copy of Windows XP and deleting the original partition. But now I have hit a speed bump. I was on my computer earlier and after I shut down, 2 hours later I tried to get back on the computer and it kept asking me to boot from CD and making a strange noise. Now I can not get any further then the boot from CD screen. Please help!!!!
  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    149

    0

    Posted July 28th, 2007 09:00

    Does the BIOS still see a hard drive? It sounds like it's very possible the drive has failed.
  • DELL-Donald K

    2 Intern

    •

    3969 Posts

    149

    0

    Posted July 28th, 2007 11:00

    See if you can boot to your resource CD and run Diagnostics on the HDD, I agree with EJN63, the HDD is likely failing.


    DELL-Donald K
    #IWork4Dell

  • 149

    0

    Posted August 1st, 2007 13:00

    If the HDD is failing what do I do now, and what am I looking for in BIOS screen?
  • shesagordie

    12 Elder

    •

    46017 Posts

    149

    0

    Posted August 1st, 2007 18:00


    @stephy2483 wrote:
    If the HDD is failing what do I do now, and what am I looking for in BIOS screen?





    Install a new IDE/ATA hard drive and reinstall XP.

    You should be able to install any hard drive up to 120gb without a problem.

    How to replace the hard drive, remember to set the jumpers to 'Cable Select'.

    Check the system Setup [BIOS], to see if the hard drive is recognized.

    Bev.







    ===================================================
    Please don't send me questions about your system by DCF Messenger.
    Post the issue in the appropriate Board, where they will be answered.