UNSOLVED

liamfr

updated

19 years ago

L

liamfr

2 Posts

0

11740

November 17th, 2007 10:00

Can I convert non-Raid Vista installation to Raid 1 without re-install?

Hi, I have a new Inspiron 531 at home. Came with Vista, 1 x 320G SATA disk. I have since acquired from another piece of equipment which got junked a second 320G SATA disk. So I installed that, no problems, second disk is available. But it seems to me it would make much more sense to configure this machine with a mirrored raid array. Can I do this without losing the data on the primary disk? There is nothing on the second disk at all yet. I found some suggestions in the forums and mentions of some Microsoft registry hacks or something, but nothing concrete. Is this possible? Would really be great.
  • mombodog

    2 Intern

    •

    12735 Posts

    716

    0

    Posted November 18th, 2007 01:00

    Usually not, but you might look in the MediaSheild utility in Windows, see if there is a way to "migrate" to Raid 1 from non-raid.
     
    Back up Important data before trying anything.
     
    Here is the MediaSheild PDF
  • liamfr

    2 Posts

    716

    0

    Posted November 18th, 2007 15:00

    Thanks Apparently, it isn't possible. The OS was initially installed with the (single) SATA drive in IDE configuration. So for now I will make do with using the second disk for automatic backups. Which is good enough, really. I can take the hit on OS re-installation when the OS disk fails if all the data is backed up :-)
  • Thot

    15 Posts

    716

    0

    Posted November 20th, 2007 12:00

    Greetings,
     
    Respectfully, please disregard the previous advice. It is wrong---it is very easy to create a RAID1 mirrored array without losing any of your data. The Intel Matrix Storage Console has this feature built into it. Please check the recent posts to this forum and you'll see my topic: " Here's how to increase the size of a Dell 'Data Safe' (RAID1 array)". In the procedure, I convert a RAID1 drive to a non-RAID drive without losing any data. Then, after I've adjusted the partitions, I convert it back to a RAID1 array again with no data loss.
     
    While my procedure is for Windows XP, the latest version of the Intel Matrix Storage Console is also compatible with Windows Vista. So it should work for you.
     
    Dell ships all of its computers with the Intel Matrix Storage Console software pre-installed if the computer was equipped with a RAID1 array by Dell using an Intel chipset on the motherboard. If your BIOS supports it, then all you need to do is download the latest copy of the software direct from Intel's website. It is free. (The latest version is 7.8). I'll leave it to you to search Intel's website for it.
     
    Caution: Do not attempt to convert your drive to a RAID1 array using the Intel RAID BIOS (Ctrl+I) because that will delete your data. You must use the Intel Matrix Storage Console under Windows. Again, see my procedure in my "How to Increase the Size of a Dell Data Safe" topic for more details.


    Message Edited by Thot on 11-20-2007 08:56 AM
  • mombodog

    2 Intern

    •

    12735 Posts

    716

    0

    Posted November 20th, 2007 13:00

    "Respectfully, please disregard the previous advice."
     
    "The Intel Matrix Storage Console has this feature built into it."
     
     
     
    Thot,
    This system does not use Intel, It uses  AMD Media Sheild.  :smileysurprised:
  • Thot

    15 Posts

    716

    0

    Posted November 20th, 2007 20:00

    Thanks mombodog,
     
    That was my "bad". I forgot that Dell models ending in "1" have AMD processors and third-party chipsets. So the Intel Matrix Storage Console will be useless on the system under discussion.
     
    Still, it seems strange that NVidia would omit this capability from their system. And yet, on page 42 of the "MediaShield User's Guide" to which you linked, it says that you cannot switch from a non-RAID to a RAID array if Windows was not installed with the RAID option turned on in the system BIOS.
     
    Presumably, the original poster does not qualify because their system never had a RAID array to begin with.