OK, so I've ordered my 7K60 and am anxious to get it installed, configured and populated. The main question I have is should I give it a single 60G partition or 3 20's or something else.
OK well the last time I ran fdisk and did this I was running DOS and Windows 3.1, So I am now running XP. How do I now which file system I have, Is tha now a selection in FDISK? Sounds like I want NTFS.
With W2000 or W-XP, give it one NTFS Partition and Format for the whole drive. With W98SE, give it one Primary DOS Active Partition and FAT32 format for the whole drive. If you use W2k or W-XP and FAT32, make a 32gb Primary DOS Active Partition and the remainder as a Extended DOS/Logical Drive, also with FAT32.
No, if you start with a bare Harddisk, W-XP CD will do it all: Partition, Format, and then install W-XP on what you have made. You will be given the options for Partitioning and Formatting type during the setup. I am a throwback, and if I am installing any OS on FAT32 format, I still use DOS Tools to prep the disk. For NTFS, I just let the CDs do the work.
Thanks, I have had this Inspiron for 2 years, bought it new so have the Office disks, driver and system software disks. However, I do not have a Windows XP disk with a Microsoft logo on it (like the Office disks), I do have a Dell disk that says "Operating System" Reinstallation System, Microsoft Windows XP Home Edition including SP1." Will this install all of Windows XP? Seems like it should be more than 1 disk.
Yes, that disc will do the job. Make sure you have some kind of broadband access, because there will be hundreds of megs of updates to a 2-year old XP CD.
@ejn63 wrote:
Yes, that disc will do the job. Make sure you have some kind of broadband access, because there will be hundreds of megs of updates to a 2-year old XP CD.
No not really. It all depends on what version the CD is. The OP says the Cd he has is with SP1 so to stay with SP1 and the updates for just SP1, not going to SP2, there are about 30 MB of uipdated.
To the oringinal poster.
That Dell label CD is a complete XP Home CD and will install the OS with no problems.
I received my 700m today. First thing I did was to replace the 40gb (5400) with the 60gb (7200). I loaded XP Pro from scratch, Loaded SP2 and then downloaded the drivers from Dell support. Now it is working great. What a great screen. I am impressed.
I have always found it useful to make a small separate 2-3GB partition on the hard drive where I could put essential stuff necessary for a reinstall such as drivers etc instead of having to find all of the needed stuff from CDs some of which I usually misplace.
gnw
8 Posts
532
0
Posted October 31st, 2004 01:00