Has anyone successfully got a WISM2 to discover? I was looking through the device driver file for Cisco Wireless Controller in EMC Smarts 17.0 HF1 and it seems shamefully outdated. it doesn't reference WISM2 at all (a product that has been available since 2011) and it does not reference the latest major code train for Cisco Wireless Controller 7.X (a software release that has been available since 2011).
Anyways, I have been trying to tweak the device driver with no success
Does anyone have any experience making the WISM2's discoverable for performing backups?
Firstly, welcome to the forums, and above all, thank you for being an EMC customer.
Please consider moving this question as-is (no need to recreate) to the proper forum for maximum visibility. Questions written to the users' own "Discussions" space don't get the same amount of attention and can go unanswered for a long time.
You can do so by selecting "Move" under ACTIONS along the upper-right. Then search for and select: "Smarts Support Forum".
Thanks for the info. I tried clicking the re-certification link you sent but I get an SSO error...
I will see about using the DDT if possible (I'm not the tool admin; I'm just the wireless admin). If we can make it work with DDT I will post the necessary settings here
christopher_ime
6 Operator
•
1962 Posts
1518
0
Posted January 14th, 2014 20:00
Firstly, welcome to the forums, and above all, thank you for being an EMC customer.
Please consider moving this question as-is (no need to recreate) to the proper forum for maximum visibility. Questions written to the users' own "Discussions" space don't get the same amount of attention and can go unanswered for a long time.
You can do so by selecting "Move" under ACTIONS along the upper-right. Then search for and select: "Smarts Support Forum".
Smarts Support Forum