UNSOLVED

teddylim

updated

23 years ago

T

teddylim

1 Message

0

8861

January 26th, 2004 14:00

Workstation NT4.0 Support for Precision 650

Where can I found application drivers for the dvd and cdrw for my precison 650 that work with NT4.0?
  • 142

    0

    Posted January 27th, 2004 19:00

    Teddylim,

    What exactly are you having issues with (installing NT, reading files while in NT, reading DVD movies, playing a video game, etc)?

     When you installed NT (assuming installing NT is not your problem) did you use CDs?  If you did then you know at least at this time NT could see your CDROM.

     Did you make any changes to your computer before the problem occurred (installed new hardware, installed new software, etc).

     If is did you install an update to Roxio or did you install a different CDRW application?

     Unfortunately NT is not supported (that is not Dell tested) on the Workstation 650.  After all NT went end-of-life before the 650 was released.

     With that being said you should not have any problems using your CDROM drives.  The only issue you may have is that the DVD will be seen only as a CDROM.  This happens because DVDs are not supported under NT.  Since NT (as well as most other Microsoft operating systems) has built in CDROM support Dell does not have drivers for you to download.

     If you are looking for help for a given application in regards to your CDROM drives I would suggest you contact your application manufacture for assistance.

     If your CDROMs are not seen in NT follow these steps to test the drive.

     Enter the system BIOS by rebooting the computer.  When you see the Dell screen, the message F2 = Setup appears on the screen. When the message appears, immediately press the F2 key. The message Entering Setup appears and is soon replaced the System Setup screens.  Turn on all 3 lights on the keyboard: The Num Lock, Caps Lock and Scroll Lock.  Hold down the ALT key and hit the E key once.  You will hear a beep.  This clears your NVRAM (plug and play memory).

     What does Secondary Drive 0 say?

     What does Secondary Drive 1 say?

     Both of these should be set to Auto.

     Are your CDROM drives listed here?

     Hit ESC, save changes and reboot.

     If you can see your drives in the BIOS boot to Windows.

     1. Click on the Start button, then go to Settings and select the Control Panel menu options.

    2. Double Click on the Add/Remove Programs icon.

    3. Find the listing for the Roxio software and uninstall it.

    4. Right click on the Start button and choose Explore. The Windows Explorer Window will open up. From the left hand side of the window click the '+' sign next to My Computer.

    5. Click the '+' next to the C: drive.

    6. Click the '+' next to the Program Files folder.

    7. Find the Adaptec folder and right click on it, then choose Delete.

    8. Click the '+' sign next to the Common Files folder.

    9. Delete any folder pertaining to Adaptec

    10. Close out of all applications and you will be back at your Desktop screen. Hit the F3 key on the keyboard and the search screen will appear.

    11. In the Named box do a search for all of the following files:

     Cdrtc.dll

    Cdral.dll

    Cdr4dll.dll

    Cdr4vsd.vxd

    Cdr4vsd.sys

     12. Rename the extension of any of these files to .rox

    Example: cdrtc.dll to cdrtc.rox

    13. Close out of the Search window and click on Start and then click on Run.

    14. In the Open box type in Regedit and then click on OK.

    15. Browse to the HKey_Current_User\Software key and delete the Adaptec key.

    16. Browse to the HKey_Local_Machine\Software key and delete the Adaptec key.

    17. Restart the computer.

     Can you use your CDROMs now?

    I hope this helps and I hope you have a wonderful day.