UNSOLVED

gobears20

updated

21 years ago

G

gobears20

1 Message

0

23676

December 28th, 2005 13:00

MFP 1600n...Port is disabled message....

I am trying to help someone set this scanner up to scan and whenever they use the software to scan, they receive the message... Dell Laser MFP 1600n

Port is disabled. Ensure that port is properly connected and power is on, Then restart your computer.

 

These guys are running Windows 2003Server. I am not able to be there and it looks like the scanner is not properly connected by the message? Does anybody have any ideas or links to help me see how the scanner should be connected? They are needing to scan around a thousand pieces of paper. They need to have the TWAIN driver installed.

 

Thanks for any help!

 

Jason

  • 256

    0

    Posted December 29th, 2005 13:00

    Hi,

    yes this message is dispayed because the printer is not correctly connected, normaly you have it when you try to scan using Paperport but your printer is connected over the network.

    Paperport cannot be use when the printer is network connected.

    Hope it helps

  • lancorp

    2 Intern

    •

    343 Posts

    256

    0

    Posted January 3rd, 2006 13:00

    You might also check that the Windows Firewall is not blocking the ports needed to communicate with the MFP.
  • NickBH

    1 Message

    256

    0

    Posted March 20th, 2006 09:00

    I had the same problem.  After a great deal of reading I discovered that you cannot actually initiate the use of the network scanning from your desktop.  The network scan is initiated from the printer/scanner by pressing start scan, select network scan (note if ethernet cable is not attached it will just start a pc scan through the USB), press select, enter user id, enter pin code, select start scanning,  the unit should then display scanning and follow any other on unit display promts.  Once completed the scanned document will be displayed on your pc by your chosen document manager.
     
    Hope this helps
     
  • mjstelly

    1 Message

    256

    0

    Posted January 8th, 2007 13:00

    When I select the START SCAN button, nothing happens. I have the printer connected to the network. I can ping it, I can access its web interface, but I can't get it to scan at all. Any ideas?