UNSOLVED

yorollie

updated

21 years ago

Y

yorollie

8 Posts

0

24281

May 16th, 2006 01:00

922 Printer can't find paper, jams, feeds crooked.....

We should start a club.  My 922 printer started acting up a while ago.  Always saying there was no paper, feeding crooked all the time, jamming when it finally got a piece.  They've replaced it once (quite nice about it), but the 2nd now does the exact same thing.  Now they want to send me a 3rd.  I'm still trying to work something better out.
 
But what bothers me most is they insisted they had no idea of these issues, and then I found a bunch of people here with the same frustrations.  They've been promising that my call has been "escalated" and that a "senior" manager is going to call me back for 4 days (since May 12/06).  They did call the wrong number, at the wrong time, once, to their credit (ha).  To think I recommended these guys to people.
 
What I want to know is, how many of you out there have had these problems.  It is one ugly paperweight!
  • countryboy03

    2 Intern

    •

    210 Posts

    456

    0

    Posted May 16th, 2006 01:00

    I would agree with you, it is a design flaw. This flaw effects The 960, as well as the  940. I had both models, and neither one works now because it eats paper. So stupid me I bought a 964, so far so good, hopefully it stays that way.
     
     
     
    Ryan
  • Just Jim

    3 Posts

    456

    0

    Posted May 16th, 2006 04:00

    My 962 has been a dream machine until yesterday.  Now it and my computer don't know they are connected for some reason.

    Here's where my biggest problem is as a first time entrant to this forum.  How do I post a question?  I don't see any place on the several sites I've visited where it says, "Post" or "Ask" or anything which resembles an entry to the ballgame.  So I saw you had a post, and a reply, and I hoped you'd be able to give me some guidance.  My thought was to find the moderator and ask if there is a clue in the setup process which will tell me why these old friends have suddenly decided to ignore each other.

    I know this isn't truly a reply to your thread, and I hope I don't find myself amongst the disappointed as this goes on.

    Any help for me?  Jim

  • countryboy03

    2 Intern

    •

    210 Posts

    456

    0

    Posted May 16th, 2006 09:00

    In the top left corner of the forum box on This Page: http://forums.us.dell.com/supportforums/board?board.id=A940

    You will see a button that says New Message. Click that and post. This is a user to user forum, and Dell does not guarentee that they will reply to you here.

    Ryan
  • Just Jim

    3 Posts

    456

    0

    Posted May 16th, 2006 18:00

    Thanks for reply, Ryan.  Oddly, I do not have such a box in the upper left of this "Community Forum" page.  I see my   Just Jim  | Logout | Preferences |  etc. in the upper left

    Then the "Community Forum" in large type

    Printers - Dell Inkjet Printers

    Back To: Forum Home > Dell Electronics > etc....

    Reply | Thread Options \/

    Jump to Page: 1

    Then the postings and replys under that.

    I am either WAY dense or perhaps I'm not accepted as a member yet.  But I did get a confirmation, and today I got a note from Dell pointing out that you replied, so I believe I should be able to use this forum.  I just may have to go ahead and pay them to get me out of this bind.  Thanks again for your help,

    Jim

  • Allanof9

    5 Posts

    453

    0

    Posted May 22nd, 2006 11:00

    I agree with you, mine is exactly the same and I like you get very very angry, as it's a new one.

    Regards

    Allanof9

  • 453

    0

    Posted May 23rd, 2006 04:00

    Yep, I made the mistake of buying this printer - 922, which never works and I bought extra ink as well, now I'm stuck with it. I think I'm going to throw it off my balcony.
  • countryboy03

    2 Intern

    •

    210 Posts

    453

    0

    Posted May 23rd, 2006 11:00

    If your sure it wont work, sell your ink on Ebay, it usually sells for a decent price on there....
     
     
    Ryan
  • Allanof9

    5 Posts

    453

    0

    Posted May 24th, 2006 09:00

    Off the balcony ! ? . My suggestion is much more rewarding, try disconnecting it from the mains supply, then holding it underwater for a full 5 minutes, great!. After that all sentient life in the ****!! will cease to exist.

    Regards

    Allanof9

  • 453

    0

    Posted May 26th, 2006 00:00

    lol, I ended up just stomping on it a few times to smash it up. it was very satisfying (Office Space moment). I'm giving my spare ink away to some dude in the next state.

    thanks for a crappie piece of crapiola dell! I wish I could be bothered to post the carcus back to you.

  • BadAnswer

    2 Posts

    153

    0

    Posted July 17th, 2006 23:00

    Would you like another one to throw off your balcony? I cleared a paper jam this weekend and now it still thinks it has a paper jam. I have contacted Dell to see if I can return unopened 922 printer ink but they do not seem to understand the question.

     

    I have ordered a Printer 924 - mistake?

     

    BadAnswer