I have the same issue. Touchpad goes into a mode with intermittent freezes after the system is idle but screen blanks. The last post is a recommendation to "press the laptop power button, wait 2 seconds and the press it again to resume and login again" There is no indication of how the power button is configured. On mine, it causes a shutdown, which is what I'm trying to avoid.
Maybe there is a way to reset the touchpad from the commandline? Like disable/re-enable?
Is there any real solution from Dell? I don't see any touchpad driver in the support listing.
In Device Manager, under "mice and pointing devices" I see three HID compliant Mouse, and one PS/2 compatible mouse. No mention of trackpad.
My temporary fix is to remove the "HID compliant touchpad" driver under "HID interface devices" (names may not be 100% accurate, I'm translating to English) in Device Manager and then force the Manager to "scan for device changes". You can navigate to that option using left alt and cursor keys - touchpad will be off once you delete the driver. The scan reinstalls the driver and re-enables the touchpad. It works until... the screen goes black again But it's better than going in and out of sleep mode.
For a long time it seemed I'm the only one with the problem - looking once again for a solution. Over a year and no Windows or Dell driver update changed anything... It might have something to do with the hardware. Not painful enough to reinstall Windows to check though.
I tried PNPUTIL to reset the driver. Still not possible without a reboot which is what we're trying to avoid.:
C:\>pnputil /disable-device "ACPI\DLL0906\4&8D7ED92&0" Microsoft PnP Utility Failed to disable device: ACPI\DLL0906\4&8D7ED92&0 Cannot disable critical system device.
C:\>pnputil /restart-device "ACPI\DLL0906\4&8D7ED92&0" Microsoft PnP Utility Restarting device: ACPI\DLL0906\4&8D7ED92&0 System reboot is needed to complete configuration operations!
@ysiuthanks for the suggestion. I was looking for a way to disable and reenable the driver as a workaround, but my Precision 5540 does not have any touchpad or trackpad drivers in Device Manager.
It has 5 instances of "HID-compliant mouse" and one instance of "PS/2 Compatible Mouse"
I tried disabling all six one by one. I found the Logitech Mouse I use while docked as a "HID-compliant mouse" as HID\VID_046D&PID_C084&MI_00\10&2939E6BC&0&0000
The other 4 "HID-compliant mouse" did not disable the touchpad.
The "PS/2 Compatible Mouse" does not offer the option to disable the driver. Only uninstall.
Dell replaced my touchpad, including the entire palmrest/keyboard case, and the issue is still unresolved. Removing the driver and reinstalling without reboot does make it work again. Some random occurrence when docking/undocking or sleep/wake cycles moving from power to battery makes it happen, I can't consistently reproduce the issue.
I searched Dell’s support site for a Synaptics driver. I found a driver listed for the Alienware Area51m R2, and I realize these are not exactly the same touchpads, but I made an assumption that Synaptics has a unified driver for modern multi-touch pads at this point and these are certainly the same ‘era’ of laptop hardware from dell. I also saw that this driver update fixes a “lag while drawing” issue.
I downloaded and ran the driver install package, which didn’t update my device driver version in device manager for my “HID-compliant touch pad”. I manually updated the driver:
PS this is absolutely the touch pad device because if I disable this device the touchpad stops working, and I routinely disable/reenable to fix the trackpad problem.
Select this:
After updating double check your driver version again:
The Precision 5540 has synaptics board ID 3125 - 1. Interested to know if The Area51 R2 reports the same board type. I know they are different dimensions and resolution.
TimG11
1 Rookie
•
20 Posts
2531
0
Posted November 15th, 2021 10:00
Is there any resolution for this problem? A new driver? Or is it a hardware failure?