UNSOLVED

stvns78

updated

7 years ago

S

stvns78

7 Posts

0

1346

July 30th, 2019 11:00

Prec 7520 Thunderbolt display

I have a precision 7520 that i have been running an Asus USB-C display for a long time. Then one day out of no where the display no longer is connecting. It will power up but will say Display Port: No Signal. Then it will go to sleep. I am also unable to hook any external displays to the HDMI port. I am able to hook up other devices to the USB-C port and it works fine. I see that a USB device is not recognized but it has been doing that since day one.

I have tried:

1. Installing new display drivers

2. Install new System Firmware

3. Installing new Thunderbolt Firmware

4. Installing new Thunderbolt Drivers

 

I checked the BIOS to make sure Thunderbolt was enabled and security was disabled. Nothing is showing in the thunderbolt attached devices.

Any suggestions?

  • 1213

    0

    Posted August 6th, 2019 18:00

    Try downgradging the bios back to 1.13. In newer versions they also borked USB PD booting.

  • stvns78

    7 Posts

    1191

    0

    Posted August 12th, 2019 06:00

    I downgraded the bios to 1.13. It initially said it failed but the bios screen is showing 1.13. However this did not help.

    Oddly when i hooked up my TB16 dock i was able for it to display on the external monitors i have hooked up to the dock. I then undocked it and the Asus USB-C external display was working. However it has since fallen back to its previous state of saying NO SIGNAL.