darant

updated

4 years ago

Closed

D

darant

10 Posts

0

662

March 9th, 2023 06:00

ME4024 and controllers balance

Hello,

I'm currently trying to understand the way to make my ME4024 iscsi array balanced and avoid problems in the future.

I have this conf with 2 POOLS (conf suggested by the system during the configuration of the array):

POOL A : RAID 6 -> 15,5 To

POOL B ; RAID 1 -> 3,7 To

I needed only 15 To so the 3,7 are a bonus but it is said in the documentation that i need to balance the 2 LUNS and they should have the same size.

I have 2 questions :

 

- Can i put all my VMs on pool A until next year where i will have the budget to buy more disks or will i lose in performance? - Do i need to put hot spare disks on this conf or is it unecessary?

Thank you for your help

 

Dara.

 

 

  • DELL-Charles R

    Moderator

    •

    4730 Posts

    •

    25476 Points

    469

    0

    Posted March 9th, 2023 13:00

    Hello darant,

     

    You could put all the VMs in PoolA.

    In Virtual mode each controller owns it's own pool.

    Pool resources would only move during a  failover.

     

    Similarly, all the resources for Linear pool can be assigned to a controller and failover only as long as the owning controller is down.

     

    There are customers that use single pool.  Two pools is only to make sure you use both controllers, but if you do not have enough drives to effectively have 2 pools, then 1 pool may be best.

     

    Hot spare only covers normal RAID groups, not ADAPT. They are not required but suggested.  You can see information about ADAPT linked below.

     

    Deployment guide:

    Configuring storage setup page 42

     virtual storage environment or a linear storage environment.

    https://dell.to/3L72r21

    Administrator guide:

    Best practices page 175

    About ADAPT page 18

    https://dell.to/3Js5bG1

     

    I hope this helps. We don't typically assist in initial configuration. We have Deployment Services you can contract if needed by contacting Sales.

    DELL-Charles R

    Social Media and Communities Professional
    Dell Technologies | Enterprise Support Services
    #IWork4Dell

    Did I answer your query? Please click on ‘Accept as Solution’. ‘Thumbs up’ the posts you like!

  • darant

    10 Posts

    444

    0

    Posted March 10th, 2023 04:00

    This perfectly answers my questions. Thank you!

     

    Dara