UNSOLVED

benjimosso

updated

18 days ago

B

benjimosso

1 Rookie

•

2 Posts

•

5 Points

0

65

October 19th, 2026 19:53

ME Series HDD FW A52: README says DSA4/DWA4 not included, but the binaries are in the package

Hello,

While preparing a drive firmware update on a PowerVault ME4024, I found that the README and the actual contents of the A52 ME Series HDD/SSD firmware package (A52_ME50_Series_HDD_Firmware_with_ReadMe.zip) don't match. I'm posting so Dell can clarify and, if appropriate, correct the README.

What the A52 README says

For entry 28.0 (Samsung PM1643a RI, version DSA4) and entry 43.0 (Samsung PM1645a MU, version DWA4), the README says:

"Note: This binary is not included in this package, please contact Dell Technical Support for assistance. Reference KB 000207843"

The affected models are listed as "Not included in this package. See Note Above.":

  • DSA4: MZILT960HBHQ0D3, MZILT1T9HBJR0D3, MZILT3T8HBLS0D3, MZILT7T6HALA0D3
  • DWA4: MZILT800HBHQ0D3, MZILT1T6HBJR0D3

What is actually in the A52 package

Both binaries are present in the Samsung folder:

  • Samsung/DSA4.bin (1,404,928 bytes), MD5: 5989e3fe32a2400b70880d888986b56a
  • Samsung/DWA4.bin (1,404,928 bytes), MD5: 998d5807936ab2f675c429e435d0cc75

DSA4.bin has a standard Dell firmware header ("DELL(tm) DSA4") and identifies itself as Samsung PM1643a, built 2022-05-04. Its supported model list includes MZILT960HBHQ0D3, MZILT1T9HBJR0D3, MZILT3T8HBLS0D3, MZILT7T6HALA0D3, MZILT15THALA0D3 and MZILT30THALA0D3. DWA4.bin lists MZILT800HBHQ0D3 and MZILT1T6HBJR0D3, among others.

Comparison with the A51 package

In A51, the README has the same "not included" note for DSA4 and DWA4, and the binaries really are absent from the Samsung folder. In A52, the binaries were added, but the note was not updated. The only change to those lines is that the leading "****" markers were removed.

The A52 package also contains other files the README doesn't reference, such as Kioxia/BA0D.bin, Seagate/ESL9.bin and Seagate/ST38.bin. This suggests the README wasn't fully updated to match the package contents. By contrast, the new "not included" notes for Seagate SWSA/SYSA/SUSA are accurate, because those binaries really are absent.

Questions for Dell

  1. Is the inclusion of DSA4.bin and DWA4.bin in A52 intentional, and are these the approved images for the models listed in the README?
  2. Is DSA4.bin from A52 supported for updating PM1643a drives currently on DSA3 in ME4 arrays, or do customers still need to contact Technical Support per KB 000207843?
  3. If the binaries are approved, could the A52 README be updated to remove the "not included" note and reference the file names (DSA4.bin / DWA4.bin) like the other entries? If they are not meant to be used, could they be removed from the package?

As it stands, customers and field engineers get contradictory guidance: the README says to contact support for a file that is sitting in the download. A clear statement either way would avoid confusion and prevent someone from flashing a file the README says shouldn't be there.

 

Thanks in advance.

  • DELL-Sam L

    Community Manager

    •

    8147 Posts

    •

    34706 Points

    3

    0

    Posted October 29th, 2026 16:08

    Hello benjimosso,

    1. Both the DSA4, and DWA4 have been removed from the download A52.       you are correct that they still show as being a part of the download, but the files for those have been removed.
    2. It is best to contact technical support and reference the KB 000207843 so that support can ensure that the correct drive firmware is used and that no data unavailable issues happen.
    3. We are working to resolve this issue in the readme file so that it will be clearer in the future.
  • benjimosso

    1 Rookie

    •

    2 Posts

    •

    5 Points

    4

    0

    Posted October 31st, 2026 03:24

    @DELL-Sam L Thanks for your reply, I still see those two firmwares DSA4 and DWA4 when I download A52_ME50_Series_HDD_Firmware_with_ReadMe.zip --> Dell PowerVault ME Series Storage HDD/SSD Firmware. 

     

    I've used the firmware and worked properly on my drives (I made sure it was been installed on the correct SSD) 

    but yeah, if Dell could fix this would be great and thanks again for your response. 

  • Origin3k

    6 Operator

    •

    2424 Posts

    •

    12408 Points

    4

    0

    Posted October 31st, 2026 11:52

    @benjimosso​ 

     

    additional notes whats behind the "... please contact Dell Technical Support for assistance...".  In a ME System with SAMSUNG SSDs it is possible that a USER try to flash a wrong Firmware to the drive and because there is no or little protection against that task there is a change for data loss.

     

    Because of that you need to open a Ticket first and Dell Support can verified what SAMSUNG drive you have and will send you the correct firmware package.

     

    I always update a single disk first and than all the others together.

     

    Regards,

    Joerg