
UNSOLVED
MD1000 empty slots are still blinking amber
Hi,
I've a MD1000 and R510 attached via Perc 6/E (latest FW 6.3.3) to one EMM (split mode). Both EMM are powered. Second EMM is not cabled and not in use.
First 3 slots are in use with 2TB disks. Slot 3-7 (Sata) are empty and blinking amber.
I configured de MD1000 with Ctrl-R Raid 5 and 3 disks and ran initialization on the created V-group
After starting up the MD100 shows a green LED (first EMM) and a blue LED. After 1 min the empty slots starts blinking amber although no disks are present and the status LED starts also blinking amber
How can I fix the amber lights and get the status LED back into blue?
When I got this MD1000 slot 0-2 where originally SATA and 3-15 SAS slots. I replaced slot 3-7 with SATA for future usage.
Greetz Martin
Responses (1)
Solutions (0)

DELL-Sam L
Community Manager
•
8149 Posts
•
34712 Points
407
0
Posted March 10th, 2015 14:00
Hello Greetz Martin,
The drives that you put into the slots 3-7 were they Dell certified drives with dell part# on them? the reason that I ask this is that with the MD series you have to use drives that are dell certified to work with the MD otherwise the drives won’t power on & be seen correctly. Here is a link to the support matrix for the MD1000 and if you look on page 5 it list out the compatible drives for your MD1000. http://downloads.dell.com/Manuals/all-products/esuprt_ser_stor_net/esuprt_powervault/powervault-md1000_Service%20Manual_en-us.pdf
Also you stated that you changed the drives that were in slots 3-7 to SATA., did you also add the interposer boards to the back of the drives?
Please let us know if you have any other questions.