UNSOLVED

Stenstrom

updated

22 years ago

S

Stenstrom

2 Posts

0

5831

August 17th, 2004 13:00

Dell PowerVault 650F error

Hello, im quite new to the "SAN" world.

I have recently recieved a "used" Dell PowerVault 650F, the problem is that when i try to boot it seems to hang.

When i connect to the console via serial cable i get the following message under the 650F post: 

Copyright (c) CLARiiON Storage Systems, Inc. 1991 - 2000
Disk Array Subsystem Controller
Model FC5600C
Firmware Revision 03.23 - Apr 11,2000

ABCDEabFabcdefgGabHabcIJKLabMabNOPabcQabc

Verifying Firmware Revision...

Initializing Back End Fibre...

Starting Flare...
Copyright (c) CLARiiON Storage Systems, Inc.   1991 - 1999

LICENSED MATERIAL - PROPERTY OF CLARiiON STORAGE SYSTEMS, INC.

                        LICENSED INTERNAL CODE

This software ("Code"), considered "Licensed Internal Code",
is the exclusive property of CLARiiON Storage Systems, Inc.  This
Code may be used only by users properly licensed to use this Code,
and only according to the terms of that license.  Use of this Code
constitutes acceptance of those license terms, including the
following:  (1) to use this Code only on the specific Machine(s),
identified by serial number(s), to which the said license applies;
(2) not to copy, reproduce, disassemble or decompile the Code by
any means, in whole or in part, and (3) not to transfer the Code
except together with (i) the Machine on which the use of the Code
is licensed and (ii) the applicable Licensed Internal Code license
terms and conditions (as stated in the Machine's user manual, and
as available upon request from CLARiiON Storage Systems, Inc.,
Coslin Drive, Southboro, MA 01772 (USA)).

The Subsystem is Currently Powering Up...Please Wait!

Entering Serial application mode_  *And here it stops to respond*

Now, the cabinet i filled with 10 * 72GB disks, and i would really appreciate if anyone could take time and give me a step by step information on how to "mount" all disks and create a single volume, that i later can use under Windows 2003, its connected to a Qlogic QLA2200 HBA.

A sidenote tho, the 650F cabinet is NOT connected to a Dell server. Its connected to a HP Netserver LC2000, so i cant use the Openmanage Arraymanage package made for a Dell server only.

 

Very best regards

/Peter

 

  • 141

    0

    Posted August 22nd, 2004 23:00

    At the "entering serial application mode" prompt, type "@$@$" and then at the prompt, type "menu" and hit enter.

    Then you should see a flare menu if memory serves.  Enter that and then select "Start Flare".  That will take you to the fcli command line.

    Once there, you'll probably need to remove any groups and unbind any existing luns.  The help text is fairly intuitive.  Once you've removed any existing group and lun configurations, use the bind command to setup new raid groups and assign them to luns and their respective storage processors.

     

     

  • Stenstrom

    2 Posts

    141

    0

    Posted August 27th, 2004 11:00

    Many thanx for the reply.

    It went flawles to get into the meny using your info, but looking at the settings in there was even more confusing.

    The 650F has a extra disk-cabinet added, both of them only running the first disk with the flare drive (slot 0, most left).

    What i need step_by_step help with is:

    I want to delete the old config so i can add/use 10*18GB disks in the integrated disk-cabinet, and 10*72GB disk in the added disk-cabinet. Both is connected to the 650F.

    Create a new config so i can use 2 volumes (10*18GB in Raid5 +10*72GB in Raid5) in Win2003 Server.

    Regards

    /Peter