Problems getting Netware 6.5 to see a Clariion CX4-120 LUN
I'm having trouble getting a 4 node Netware 6.5 cluster to see 3 LUN's. 2 LUN's are fine, but the 3rd only presents it's LUN address (LUN 2), but the size is dispayed as 0kB, while this LUN 2 in fact is 1.6TB.
LUN 0, 200GB, owned by SPA
LUN 1, 1.6TB, owned by SPA
LUN 2, 1.6TB, owned by SPB
The 4 hosts are zoned to SPA as well as SPB, but only using 1 HBA, the other HBA is still connected to an MSA1500.
I do "see" all three LUN's and therefore I suspect there's nothing wrong with the zoning, but the weird thing is that this SPB-owned LUN is displayed as being a 0kB LUN.
The HBA is a 2Gb QLogic card and Powerpath 3.06 is installed.
I was thinking the same thing.... I will try that tomorrow. I must say that I only did the Clariion part and a Netware specialist did the Netware part, so it never came to me that it might be a Powerpath issue. I think it's not even loaded
My guess is that Netware sees the LUN on the first path, but the Clariion doesn't tresspass it somehow. I don't know.... anyway: I'll call them tomorrow and have them tresspass the LUN to SPA and give it another try. I'll keep you updated.
The tresspass worked just fine. But after we installed PPath, it worked fine, just like expected and tresspassing while copying data did not interrupt anything.
But now we're struggling to get the right parameters for the QLogic hba driver.
I used Primus case "emc139262" and it worked. The Novell multipath setting had to be turned off. It seems that if it's on and PPath is running there are 2 captains on the ship....
dynamox
11 Legend
•
20419 Posts
•
87439 Points
181
1
Posted December 20th, 2008 16:00