Perc H730 CIM monitoring with VMware ESXi 6.5 U1 not working
I am connecting to the ESXi web GUI for the host, I don't have vCenter server.
When I go into the Host - Monitor - Hardware - Storage, I get the message "The Small Footprint CIM Broker Daemon (SFCBD) is running, but no data has been reported. You may need to install a CIM provider for your storage adapter." Below I see "No data available".
Hardware is a Dell PowerEdge R630 with Perc H730 Mini and a Raid 10 configuration with 8x 2.5" disks.
I am running “Dell Customized Image ESXi 6.5 Update 1 A05 (based on ESXi VMKernel Release Build 6765664)” which contains driver “Dell PERC Controller Drivers - lsi-mr3 - 7.700.50.00”
sfcbd-watchdog service ist running and System Sensors are working and viewable.
Dell VMWare OMSA is installed.
The system is working without any problems and I have Rebooted the host several times.
I would appreciate for any help/advice on how I can get my storage monitoring data visible?
Additional Information: Dell PowerEdge R630 is at latest Firmware Level (Life Cycle Manager via Dell), Perc H730 Mini FW is Version 25.5.3.0005, LSI Driver is Version 7.700.50.00, Disks (Seagate ST1200MM0088) are at Rev. TT31.
Storage Monitoring via "Open Manage Server Administrator 9.1" (installed on a VM with Windows Server 2016) is working however.
Looks like a problem with VMware ESXi Web GUI.
Has someone got Storage Monitoring working with just the Esxi Web Gui?
MartinSitte
1 Rookie
•
8 Posts
7290
0
Posted December 16th, 2017 10:00
/var/log/vmkernel.log shows following errors:
H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x24 0x0 (invalid request, invalid field in CDB)
H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x20 0x0 (invalid request, invalid command operation code)
http://www.virten.net/vmware/esxi-scsi-sense-code-decoder/?host=0&device=2&plugin=0&sensekey=5&asc=20&ascq=0&opcode=
http://www.virten.net/vmware/esxi-scsi-sense-code-decoder/?host=0&device=2&plugin=0&sensekey=5&asc=24&ascq=0&opcode=
What could be the reason for this errors?