UNSOLVED

14Chris

updated

3 months ago

1

14Chris

1 Message

0

1878

November 29th, 2017 02:00

no Bios display on PowerEdge T410

Hello, I'm from France,

I recently bought a Dell PowerEdge T410 with Windows 10 installed on it (the server is not under warrantly) and when I launched the server I haven't access to the Bios screen.

My screen is talling me "No signal" but after 2 minutes the server displays the Windows 10 boot screen and I had access to Windows 10.

I tried to clear the CMOS with the NVRAM_CLR jumper but the only result I had was that W10 was not booting anymore ...

I haven't any errors on the server front "little" screen.

Do you have any ideas on the problem ?

Best regards.

  • Daniel My

    12 Elder

    •

    6205 Posts

    1464

    0

    Posted November 29th, 2017 10:00

    Hello

    Your monitor, KVM, or whatever device you are using for video display is not likely outputting video fast enough for you to see the BIOS screen.

    Windows 10 is not a supported operating system, but viewing the BIOS logo/screen has nothing to do with the installed OS. I suspect that you have an unsupported GPU installed into the system. BIOS video output may not work properly with an unsupported GPU, and if you reset BIOS defaults by clearing NVRAM it will enable the on-board graphics.

    I suggest checking to see if your video is plugged into a GPU PCIe card or the system board graphics port.

    Thanks