UNSOLVED

dexvx

updated

3 months ago

D

dexvx

16 Posts

0

36293

December 8th, 2011 10:00

BSOD: DPC Watchdog Violation on R710

We have about a dozen R710 servers testing Windows 8. For some reason, two of them always get DPC Watchdog Violation BSOD's at random intervals (almost always during system is boot up). I was wondering if this was a piece of hardware that is failing?

Servers are configured as follows:

R710, Bios 3.0.0 (default settings, except enable SR-IOV and QPI Bandwidth is I/O)
2x Xeon X5680 or X5690 
6x 8GB RDDR3-1333
500GB 3G/6G SATA  drives
Various Intel NIC's, usually X520's in PCI-E #3 and i350-T4 in PCI-E #1
Firewire in PCI-E #2 

Windows 8 builds 8102 through 8148

  • DELL-Rey G

    4 Apprentice

    •

    1068 Posts

    1534

    0

    Posted December 8th, 2011 10:00

    I'm just curious to know if the add in cards are removed, does the issue still happen? Have all fw and bios been updated? I see that you have bios 3.0, 6.0.7 has been posted to the support site.

  • dexvx

    16 Posts

    1534

    0

    Posted December 8th, 2011 11:00

    If the add-in cards are removed, the same BSOD will still be there, at random intervals. To be fair, if the BSOD does happen, the system will automatically reboot and usually get into Windows the second try. It's just a little unsettling to have some particular systems giving this BSOD when other very similarly configured (or identically configured) systems do not have this issue.

    I will probably try a BIOS upgrade on the failing system and see if that resolves it.

  • dexvx

    16 Posts

    1534

    0

    Posted December 12th, 2011 13:00

    Updated the BIOS to 6.1.0. I'm still getting a DPC_WATCHDOG_VIOLATION randomly on some reboots.

  • Daniel My

    12 Elder

    •

    6205 Posts

    1534

    0

    Posted December 12th, 2011 15:00

    @Dexvx

    Good suggestions by Reybeast2.  I would also recommend that you ensure all hardware is up to date, mainly the BIOS, iDRAC/BMC, RAID controller, and NICs.

    The DPC watchdog violations are typically driver issues.  To verify the hardware I would advise checking the hardware log for any errors.  You can view the hardware log via CTL E during POST, or by using Open Manage Server Administrator within the OS.  I'm not sure that OMSA will have full functionality within Windows 8.

    You can also test the hardware by using the diagnostics within the USC.  You can access the USC by pressing F10 during POST.

    If you cannot locate a hardware issue then you may want to try to locate the driver which is causing the problem.  If there are no driver references in any dump files, system event log, or application log that point to the cause of the problem then you may want to use a monitoring program to see if any of the drivers are having latency issues.

    Here is a 3rd party utility that monitors driver latency.  This is not a Dell utility, so use it at your discretion.

    www.thesycon.de/.../latency_check.shtml

  • Noah.A

    1 Message

    1534

    0

    Posted February 7th, 2013 10:00

    I'm seeing the same issue on DELL T3600 workstation running Windows 8.  This happens when the computer wakes up from sleep mode.  I see the DPC_WATCDOG_VIOLATION Error. 

    I also see in the system log:

    The device driver for the Trusted Platform Module (TPM) encountered a non-recoverable error in the TPM hardware, which prevents TPM services (such as data encryption) from being used. For further help, please contact the computer manufacturer.

    Bitlocker is enabled on the system.

    I'm running the Client System Update software provided and am current with everything.