I was just wondering if there was a proper procedure to upgrading the bios and perc firmware on a 4600.
I was just going to upgrade the BIOS first (A11), then install and upgrade the perc firmware (2806089). Or should I install the perc update first, or does it even matter.
Adaptec has stopped supporting FAST, however the FAST CLI is still available. I would recommend uninstalling FAST altogether and installing Dell OpenManage Array Manager. The Array Manager not only manages Addaptec based Perc controllers, it also manages the LSI Logic (formerly AMI) based controllers.
the one feature from FAST i am still looking for in the array manager (besides a cleaner interface) is e-mail notification of errors/failures .... does array manager do this and i am just missing it? messing with SNMP to make an e-mail seems alittle much....
DELL-Mark A
2 Intern
•
2521 Posts
295
0
Posted June 30th, 2004 15:00
Hi,
The system upgrades are independant of the Perc upgrades, but it is important to do each section in the order listed.
System Upgrades:
Dell Server System BIOS, PowerEdge 4600, A11
FileName: PE4600-BIOSA11.exe[629 KB]  Release Date: 5/26/2004
ESM Firmware, PowerEdge 4600, A31
FileName: PE4600-ESMA31.exe [224 KB]  Release Date: 11/24/2003
(if installed)
Dell Remote Access Controller - DRAC III, Firmware, v.3.12, A01
FileName: d_0426v312_d3.exe [2 MB]
Perc Upgrades:
Adaptec Perc 2/si, 2/qc, 3/si, 3/di, Driver, Windows 2000, v.2.8.0.6085, A15
FileName: W2K-2806085.exe [259 KB]
Adaptec PERC3/Di, Firmware, PowerEdge 4600, v.2.8.0.6089, A06
FileName: PE4600-280_6089.exe [1 MB]
Thanks for using the Dell Community Forums!