UNSOLVED

Andy42

updated

20 years ago

A

Andy42

16 Posts

0

20015

March 4th, 2007 15:00

what tray do I need if I want to add a SATA drive to a PE2950 server?

I can't find any information on dell.com or any page that tells me what tray I need to buy to add a
standard SATA drive to a PE2950 with SAS backplane.
 
Can I buy this online from dell or do I need to call them?
 
Are there any SATA tray that does not need the interposer adapter?
 
  • MarkEngle

    4 Posts

    599

    0

    Posted March 4th, 2007 18:00

    Hi Andy

    You need the CC852 tray for SATA and you must use the interposer, PN939. It's the only way to fit SATA to a SAS backplane.

    These are not on the web site, you need to talk to a sales rep.

    Mark
  • Andy42

    16 Posts

    599

    0

    Posted March 5th, 2007 07:00

    Hi
     
    Thanks for the reply.
     
    I am a bit confused here.
     
    In this thread, that I just found
     
    it says:

    1) SATA Drive carrier (F9541 / NF467 / H9122 / G9146) - This is a SATA ONLY carrier (SAS will not install) - you do NOT need an interposer board.

    2) SAS/SATAu Drive carrier (CC852)+ interposer card - This will hold SAS or SATA, but a SATA drive in this carrier will require an interposer board.

     

    So, could i not just use a F9541 without interposer card to geta SATA drive into a SAS backplane? or is the above wrong?

    //andy

  • MarkEngle

    4 Posts

    599

    0

    Posted March 5th, 2007 16:00

    Hey again

    I think it is wrong. As far as I know you can not just stick a SATA drive in to a SAS backplane.
    They use two simular but different connectors.

    Mark
  • Andy42

    16 Posts

    599

    0

    Posted March 5th, 2007 17:00

    Even the "Hardware Owner’s Manual" documentation says;
     
    Installing a SATA Hard Drive Into a SATA Drive Carrier
      NOTE: SATA hard drives that connect directly to the SAS backplane must be installed in SATA drive carriers
    (labeled "SATA"). Only SATA hard drives with interposer cards can be installed in SATAu drive carriers.
     
    It also says
     
    SATA drive carrier — Usable only with a SATA hard drive.
    SATAu drive carrier — Usable with either a SAS hard drive or a SATA hard drive with a universal
    interposer card. The interposer card provides enhanced functionality that makes the SATA hard drive
    usable in some storage systems.
     
     
     
    That sounds to me that you can get a carrier that directly can connect a SATA drive to the back plane? but if I want to sue the use the SATAu tray, I need the interposer?
     
    Or I am I totally lost here?
     
     
  • MarkEngle

    4 Posts

    599

    0

    Posted March 5th, 2007 20:00

    Hi Andy

    Don't know what to tell you. I kind of went through the same thing. None of my 2950's have SATAu drives, there all SAS, and they are in the 9541 trays. However I did get a couple of MD1000 loaded with SATAu drives and they are in the CC852 trays with the interposers. This is how they came from Dell. I still think the issue is that its not the trays that needs to fit the backplane but the drive. The back of the trays are open, it the HD it self that fits into the backplane. I still don't see how a SATA drive will fit in a SAS backplane without some way of converting. You might want to talk to a Dell Peripherals Specialist.

    Good luck,
    Mark