UNSOLVED

akoop

updated

15 years ago

A

akoop

1 Rookie

•

27 Posts

0

151548

July 9th, 2008 13:00

RAID 1 Drive Predictive Failure

RAID 1 without a Hot Spare

 

Perc4/SC Controller 0, Array Disk 0:1 reported predictive failure.

 

The drive is:

Seagate ST336607LW
33.87GB
320MB/sec
SCSI

 

2 Questions:

#1  Since I can no longer find that size drive is it OK to replace with a larger drive and just have unused space?

 

#2 Should I add the replacement drive in as a hot spare before removing the bad drive or should I mark the bad drive offline, pull it and the insert the new drive? 

 

Thanks,

Alan

  • at5147

    884 Posts

    2096

    0

    Posted July 9th, 2008 15:00

    1. Yes

     

    2. The latter, marked it offline and replace. 

  • aipco

    2 Posts

    2096

    0

    Posted July 14th, 2008 17:00

    Hi Akoop

     

    I have the same situation. Did you repalce the hard disk successfuly? what is your procedure?

     

    Thanks a lot

     

  • akoop

    1 Rookie

    •

    27 Posts

    2096

    0

    Posted July 14th, 2008 18:00

    I have not yet performed the drive replacement, but I have confirm with Dell Tech Support that the steps are as follows:

     

    Mark the drive offline

    Use Dell Array Manager and clear all events

    replace the drive

    it should auto-rebuild the array, but if not use Array Manager to rebuild.

     

     

    Message Edited by akoop on 07-14-2008 02:08 PM
  • aipco

    2 Posts

    2096

    0

    Posted July 14th, 2008 18:00

    Thanks for your quick reply :-)

     

     

     

  • d-farah

    1 Message

    2096

    0

    Posted August 16th, 2011 08:00

    I have HP DL380 G4 proliant, a acouple of weeks ago  i had rebooted the server and i found that  the error saying predictive failure!!!! Replace drive immediately to avoid loss of data. i have three disks two of them are mirrored as 1 disk and other disk is configure normal standard.but my problem is how can identify which disk are failure.

    please i need help!!!!!!!!!!!!!!!!!

  • theflash1932

    11 Legend

    •

    16255 Posts

    2096

    0

    Posted August 16th, 2011 09:00

    I would suggest posting your question on the HP forums or calling HP support, as they will be more familiar with how to identify the failing disk.  It may be similiar to a Dell, but it may be very different ... on a Dell, the pred fail drive will flash green and amber alternately.  You would also be able to identify the failing disk in the management software in the OS.