
UNSOLVED
Poweredge C1100: One of the drive bays doesn't recognize 1TB SATA3 HDD.
I bought a refurbished C1100 server from a seller. The spec is as follows.
- processor: dual intel xeon L5520
- RAM: 24GB
- 4x3.5" trays
- RAID Controller: Perc 5
- Dual 10/100/1000 Ethernet
Out of 4 bays, the second bay from the left doesn't recognize the hard disk. I've tried 4 1TB SATA3 (with 3 different major brands) disks into all the 4 bays and only the second one cannot detect the HDD. There is nothing on the PD screen. When I tired to run HDD on the second bay only with the rest of the drives in the other three bays removed, an error message " No PD Present" on the screen.
The funny thing is when I inserted 500GB SATA HDD into the second bay, it runs well. Of course SAS works well in every bay. Only 1TB SATA3 is the problem here.
What am I supposed to do?
Responses (1)
Solutions (0)

DELL-Chris H
7 Practitioner
•
9682 Posts
•
48046 Points
415
0
Posted October 10th, 2013 09:00
Nancy0623,
That sounds like it may be caused by a cabling issue. If you power down and reseat the sata cables on the backplane and board, does the problem persist? If you swap 2 of cables does the issue move? LAstly, what firmware version is the controller at?
Let me know what you find out.
DELL-Chris H
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!