In this moment I'm ended in a situation where each of five disks are not seen by controller.
The controller still sees three phisycal devices no matter which one of five spares are inserted, still after power cycling host each time a spare disk is inserted in E32:2 (third slot of six available on my PE2950)....
I would recommend exporting the controller log from the PERC and reviewing it for errors. If multiple drives in that slot are randomly showing as missing, I would suspect the backplane or the cabling, and reviewing the PERC log may help confirm that. I'd go ahead and reseat the backplane cabling, as well as export the log from perccli and see what it says.
The strange thing is first disk of second raid 1 goes missing after few days :
----------------------------------------------------------------------------- DG Arr Row EID:Slot DID Type State BT Size PDC PI SED DS3 FSpace TR ----------------------------------------------------------------------------- 1 - - - - RAID1 Dgrd N 136.125 GB dflt N N dflt N N 1 0 - - - RAID1 Dgrd N 136.125 GB dflt N N dflt N N 1 0 0 - - DRIVE Msng - 136.125 GB - - - - - N 1 0 1 32:3 3 DRIVE Onln N 136.125 GB dflt N N dflt - N -----------------------------------------------------------------------------
Other than supposed faulty drive , I've tried other FOUR (!) identical disks
The behavior is always the same, disks missed after few days (2-3-4...)
All are used disks but something make me think about controller issue....
How can I troubleshoot this ?
Can I check each single disk for integrity/functionality ?
Without that log, there isn't any recommendation I could make beyond creating a new array. There isn't enough information for me to provide further steps.
Not able to get log in this moment, however it tells no more than a drive is missed but nothing about the cause.
I have opened PE2950 re-seated all connectors relative to controller , disks backplane and sideplane the controller is connected to , nothing seemed faulty however.
Drive 2 is now detected, reinserted into disk group and rebuilt.
It lasts ok from three days, too early to say it's fixed.....
DiegoLopez
6 Operator
•
2668 Posts
1316
0
Posted April 14th, 2020 02:00
Hello @Oknet,
What firmware version do you have for the PERC controller and for the HDDs? The latest version for HDDs is
HS11.
What you mean by "restoring disk into array"? Do you mean to import the foreign configuration?
Regards.