a_marwan

updated

13 years ago

A

a_marwan

4 Posts

0

255685

October 24th, 2012 03:00

How to disable built-in PERC S300 Controller and Connect HDDs directly to On-Board SATA

Hello

I bought new servers two of them came with PERC S300 controllers. When I tried to install Linux (CentOS) on it, the system couldn't see the RAID!

After some researches , I noticed that it is Windows specific (fake RAID)

I want to disable this controller and connect my HDDs directly to the main board SATA connectors, and implement a software RAID solution under Linux.

What I need is :

What cables do I have to order for that purpose?

Thanks

  • a_marwan

    4 Posts

    15640

    0

    Posted January 4th, 2013 09:00

    When I selected my servers and decided about their specifications, this (red) note was not on the site, and I'm sure about that, because I don't have any Windows servers on my network.

    Now that I have ordered and recieved them, I'm looking for a solution.

    I ordered this kit: Dell PowerEdge HDD DATA CABLE KIT DP/N C450M CN-0C450M

    I'll recieve it next week. I hope this will help me bypass this annoying issue.

  • DELL-Chris H

    7 Practitioner

    •

    9682 Posts

    •

    48046 Points

    15640

    0

    Posted October 24th, 2012 06:00

    A_Marwan,

    First off, what model server are you referring to? In regards to the Raid issue, you need to boot to the BIOS (F2 at Dell screen) from there it depends on the server. Normally you will need to go to Integrated Devices and disable the Raid controller. After that then go to Sata Settings and make sure that the embedded is enabled as well as needing to set the port you want to use to AUTO, if it is not already.

    Let me know how it goes.

    DELL-Chris H

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!

  • a_marwan

    4 Posts

    15640

    0

    Posted October 27th, 2012 17:00

    Thank you for replying "Dell - Chris H". It's a Dell PowerEdge R310 server. I tried what you suggested but my Linux OS (CentOS) can't see the HDDs, they are connected to the MB using a Multi-Connection Cable. I think that I have to change this cable with another kit from HDDs to SATA connectors in the MB. is that right? If YES: What do I have to order. If NO: what do I have to do else?

    Thank you in advance.

  • 15640

    0

    Posted January 4th, 2013 06:00

    I had the same problem. If I knew this, I would not order the PERC S300 controller at all!

  • theflash1932

    11 Legend

    •

    16255 Posts

    15640

    0

    Posted January 4th, 2013 08:00

    Yeah, if only Dell made more of an effort to inform potential customers that that is the case ...

  • Dev Mgr

    6 Operator

    •

    9308 Posts

    •

    3 Points

    15640

    0

    Posted January 4th, 2013 09:00

    If you click on the "Help Me Choose" right above the raid controller list you get this pop-up window:

    content.dell.com/.../hmc-raid-controller.aspx

    For both the PERC S100 and S300 it clearly states that the OS support is limited to "Windows only".

  • 15640

    0

    Posted January 8th, 2013 06:00

    I resolved the problem by removing the PERC S300 card totally and connect my hard drive directly to the MB using a spare SATA cable from another Dell computer.  After that installing ESXi host went smoothly without any problem.  

  • reexed

    1 Message

    15640

    0

    Posted March 24th, 2014 03:00

    hello l think l will need this cable, please tell where you ordered it

  • a_marwan

    4 Posts

    15640

    0

    Posted March 24th, 2014 06:00

    You can google "Dell PowerEdge HDD DATA CABLE KIT DPN C450M CN-0C450M"

    here is what I found:

    http://www.ebay.com/itm/Genuine-Dell-0C450M-Object-Storage-DX6004S-PowerEdge-R310-HDD-SATA-Cable-/181353641284?pt=LH_DefaultDomain_0&hash=item2a3984f544