How do you Add a non RAID Drive to the Backplane So You can Backup the Current
RAID
Dell PowerEdge T320 with PERC H710 Adapter
Apparently you can't just simply insert a drive into one of the free slots on the front backplane and expect to use it as a regular drive, like for backups.
So, with knowing this, can I create a separate RAID or VD for only this drive, so I can then use it to make a full, complete system backup of the current RAID 5?
I started to try this, but then I got the message "It is recommended that all newly created logical drives be initialized...etc..." I couldn't find any place to initialize it, so I canceled to be safe.
After inserting new drive can you check drive status on H710 Configuration utility or iDRAC. If it is showing as ready then you can create a RAID 0 with the drive. Is this a brand new drive or it is a used drive with configuration?
DELL-Shine K
6 Operator
•
3042 Posts
264
0
Posted October 22nd, 2022 06:00
After inserting new drive can you check drive status on H710 Configuration utility or iDRAC. If it is showing as ready then you can create a RAID 0 with the drive. Is this a brand new drive or it is a used drive with configuration?