UNSOLVED

Spektre99

updated

5 years ago

S

Spektre99

9 Posts

0

833

June 27th, 2021 09:00

Difference between M276H and VNMGT T710 backplanes

Both are listed as part numbers for T710 backplanes.  Both are 16 bay 2.5" backplanes.  Both look identical except that the M276H has only one SAS connector populated while the VNMGT has both.

What are the differences between these two backplanes?

  • DELL-Young E

    Moderator

    •

    5421 Posts

    •

    37 Points

    674

    0

    Posted June 27th, 2021 22:00

    Part #:M276H  Part Desc.:PWA,BKPLN,SV,T710,2.5SASX16

    Part #:VNMGT Part Desc.:CRD,BKPLN,T710,2.5SASX16,6G

     

    M276H << 1 SAS port, cannot support 6G connection

     

    VNMGT << 2 SAS ports, supports 6G connection

    ​

    Not interchangeable

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!

  • Spektre99

    9 Posts

    658

    0

    Posted June 28th, 2021 21:00

    I'm confused.  I thought the HBA determined the speed (3G, 6G, 12G) and the backplane was just a physical connection.

    Thank you for the reply.

  • DELL-Young E

    Moderator

    •

    5421 Posts

    •

    37 Points

    654

    0

    Posted June 28th, 2021 21:00

    Hi, I beg to differ. In order to keep that speed, HBA, backplane, HDD they should all match to bring up the speed. ^^

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!

  • Spektre99

    9 Posts

    646

    0

    Posted June 29th, 2021 08:00

    Thank you for your help.

     

    So the M276H backplane includes some form of extender that allows 16 drives to be controlled from only 4 SAS channels?

     

  • Spektre99

    9 Posts

    621

    0

    Posted June 30th, 2021 19:00

    When is the VNMGT backplane used.  The T710 Hardware Owners manual states the T710's 2.5" backplane has only 1 SAS connector.   When would you use both?

  • DELL-Young E

    Moderator

    •

    5421 Posts

    •

    37 Points

    611

    0

    Posted June 30th, 2021 21:00

    Hi, when both channels are used. However this might show an error during POST that a cable is missing. I'm afraid we can't be sure would until you actually try it. ^^

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!