Dell Poweredge R7525 Server Fails to boot after first restart.
Dell Poweredge R7525 Server does not recognize Hard drive after first reboot.
I am trying to PXE boot Dell Poweredge R7525 Server but it failed to recognize the Hard drive, I injected the "R7525_Drivers-for-OS-Deployment_Application_7GHC7_WN64_19.12.07_A00" in boot Image and then it started the PXE boot, went through the task sequence steps but after first reboot, it failed to recognize the hard drive.
I tried to deploy Vanilla OS, but to same results. I sense some missing driver here. I tried to inject "SAS-RAID_Driver_6WMD1_WN64_6.0.2.0007_A01" but it skipped saying that it does not match the OS version.
Thank you for your response. That is the second thing that I tried on Saturday but to the same results. After reboot it stays on Windows logo. Seems some driver issues.
Looking into the system details and driver details, I am assuming you want to install Windows OS on RAID VD created on SWRAID S150 controller? Since you have not mentioned drives you are using, here are few recommendations:
1) This config is either connected with SATA drives or NVMe drives (S150 supports only these protocols).
2) SATA settings (Press F2-> System set up-> System BIOS-> SATA settings ) set to "RAID mode" to enable S150 controller in device settings.
3) If this system is having NVMe drives, please set "NVMe settings (Press F2-> System set up-> System BIOS-> NVMe settings) to RAID" to enable NVMe drives under S150 controller.
4) If RAID disk is configured, ensure all the physical disks initiated to "Windows metadata" in S150 controller controller management (Press F2-> System set up-> System BIOS->Device settings->Dell EMC S150)
5) Once all the above Pre-requisites met, please download and extract S150 windows OS drivers from below link. Please note this is zip file, if you double click, it will extract driver inf to folder.
6) Copy above driver files to any USB key or mount via iDRAC Virtual console (virtual media -> connect virtual media -> removable disk and mount USB key or image file of the drivers).
7) Start windows installation, just before selecting disk partition, load above mounted drivers. And it shall detect RAID Disk which is created exactly the same capacity.
Allow installation to complete. For more detailed steps, please refer S150 documents:
And also, Please check what are the settings for below parameters:
Logical Processor (F2->System set up->System BIOS->Processor Settings) shall be enabled or disabled.
Virtualization Technology ((F2->System set up->System BIOS->Processor Settings) shall be disabled before OS installation. Post Windows patch update, this settings can be enabled for using Windows Hyper-V feature.
X2APIC mode ((F2->System set up->System BIOS->Processor Settings) shall be disabled for Win2016 OS installation (not supported on Win2016 version)
DELL-Marco B
3980 Posts
1524
0
Posted April 20th, 2020 07:00
Hello,
please can you check the documentation about how to install Operative System
https://dell.to/2VJH8YX
Thanks
Marco
DELL- Marco B
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!