UNSOLVED

Marcel Kroon

updated

22 years ago

0

6914

September 3rd, 2004 09:00

Changing Stripe to RAID-1

Changing from stripe to RAID-1? (PowerEdge 4400 with PERC3/DI Raid controller)

I plugged a 36Gb SCSI drive in a PowerEdge 4400 with a PERC3/DI controller and created a virtual disk of type RAID-0. I didn’t had a second hard disc yet, so I couldn’t make a RAID-1 immediately. With a restart of the server I saw that the RAID-0 was mentioned as STRIPE by the Perc3/DI RAID-controller. Once I received my second 36Gb hard disc I wanted to create a RAID-1 of these two. When I start the OpenManage Array Manager (3.5.0 build 555.4) I can select the first virtual disc of 36Gb and start ‘Reconfigure’, I can select the second 36Gb hard disc, but in the field ‘Type’ I can only select RAID-0. Is there any way I can change this ‘Stripe’ disc to RAID-1 without losing the information that’s already on there?

Best regards,

Marcel

  • bilbus

    55 Posts

    218

    0

    Posted September 6th, 2004 06:00

    i beleve you can only change raid levels from inside open manage software

     

    i know it can be done! i did it yeserday on a similor system