Dear all: I got a new PE R930 later last year. The R930 came with 2T 7.2K NLSAS *12 in slot0-11 and the type of its backplane is x24 hard drive systems with unified backplane (single-PERC configuration), the Raid controller type is single Perc H730p. Now I want to purchase 2.4T 10K SAS *12 and install them in slot 12-23,but I have seen this in manual: SSD/SAS/SATA hard drives cannot be mixed in a system. What can I do next?
SAS and NLSAS are the same interface type(SAS). They should be seen as the same drive type by the controller. Mixing rules should not affect the ability to use SAS and NLSAS together. NLSAS is typically much lower performance than a normal SAS drive, so I would not recommend using them in the same virtual disk.
Hi Daniel Mysinger,I will not combine all PDs in one DG. 12 NLSAS PDs one DG and other 12 SAS PDs one DG. What confused me is whether SAS and NLSAS Harddisk can be mixed on one backplane. Thanks a lot.
Daniel My
12 Elder
•
6204 Posts
1616
0
Posted November 20th, 2018 11:00
Hello
SAS and NLSAS are the same interface type(SAS). They should be seen as the same drive type by the controller. Mixing rules should not affect the ability to use SAS and NLSAS together. NLSAS is typically much lower performance than a normal SAS drive, so I would not recommend using them in the same virtual disk.
Thanks