I have a Power Edge 400SC , just bought a 200GB Hard Disk, but my systems only sees it as 128GB under Disk Management. Do I need to upgrade my system BIOS for >200GB disk support? Thanks!
Are you using Windows 2000? I just installed a 200gb Seagate IDE hdd. The BIOS detects the capacity as 200gb, however it is shown as 128gb within disk management for Windows 2k.
I had the drive in there for a while and then decided to take it out and put into another machine to make a high capacity server (am now waiting on another 1600SC with 2 73 gig SCSI drives deal). I decided not to leave the large hard drive on what I'm using as a client machine.. All it takes is a bad install or something and the whole computer needs to be reloaded (I get picky).. So, I mploy the use of separate machines that are used as servers to hold data..
That being said, you should not have any problems with a 200 gig unit on XP.
I have the 1600SC with a 2ghz P4 Xeon and dual 73GB Ultra320 SCSI drives. I bought it about a year ago. The two things I immediately upgraded was the RAM, and the CD-ROM drive. I put two 512mb sticks of ECC DDR memory in there which were brand new Kingston modules off Ebay for $110 to my door, and a 16X DVD-ROM/CDRW from Dell made for the Dimension desktops. I later added a Dell (Seagate) Travan 40 drive in there as well I bought brand new off Ebay for $99. The drives are black to match.
However, I have heard that the new 400SC models are extremely quiet. Since you own one, is this true? I know a lot of people have buying the new ones to use as their desktops since they have a motherboard with upgradeable AGP, 800mhz bus, USB 2.0, etc. The 1600SC is a true entry-level server, and it definitely screams if it's in a room with little amibent noise.
I knew it had something to do with Windows since the BIOS detected the drive properly. And then I found a link to a Microsoft knowledgebase article about this issue. I followed what it said, and it solved the problem.
Windows 2000 SP3 and above support 48-bit Logical Block Addressing (LBA) for ATAPI drives over 137gb as long as the BIOS supports it as well, but it is not enabled by default. To enable this in Windows 2000:
Start Registry Editor (Regedt32.exe). Locate and then click the following key in the registry: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Atapi\Parameters
On the Edit menu, click Add Value, and then add the following registry value: Value name: EnableBigLba Data type: REG_DWORD Value data: 0x1 (select HEX as value type and enter a 1)
Quit Registry Editor and reboot the machine. Now the drive will be shown with the correct capacity.
48-bit LBA support is enabled by default in Windows XP SP1. Windows XP Media Center Edition and Windows XP Tablet PC Edition already include SP1. I would not recommend using 48-bit LBA mode without SP1 installed.
Yes, I have both a 1600SC (2.8 gig) with the 2 73 gig drives (I purchased probably the same time you did), and a 400SC (3.2 gig) (purchased last September on a good deal from Dell) and the 400SC is quieter than the 1600SC. One thing to keep in mind is the 1600SC is my workhorse carrying 7 hard drives now (one on the bottom floor of the case). I can see why others are using the 400SC as a gaming platform.. I have upgraded the unit and added an 8x AGP card to it, and the machine with it's 1 gig of RAM rocks!!
Now, as for the sound.. The 400SC is definitely whisper quiet in a room. It has what looks like a 100mm fan in the front of it and what looks like an 80mm fan in the snorkel that pulls directly from the processor. The 1600SC has two 120mm fans and one on the CPU.. I believe Dell makes the unit cooler by having larger fans blowing at slower speeds and still creating the needed volume to cool. I would recommend the 400SC if you have a situation where noise is an issue.
Good luck.. Hey PM me if you see the same deal for the two 73 gig drives again..
aeubank
52 Posts
190
0
Posted January 10th, 2004 00:00
I have 400SC and it recognizes my 200 gig unit.
I would imagine 300 gig unit should work.