TedLarsen

updated

14 years ago

T

TedLarsen

1 Rookie

•

22 Posts

0

55130

July 31st, 2012 08:00

+2 Drive (internal drives) configuration with the 8-bay R510's?

This may be a dumb question, but I'm having difficulty finding a clear-cut answer to this question.  I know the 12-bay R510 configurations support the +2 internal drives inside the system.  But is there any 8-bay R510 version that also has the capability of adding 2 internal drives?  Or is this ONLY an option with the 12-bay units?

 

Thanks in advance for any clarification you can provide.

  • 3912

    1

    Posted July 31st, 2012 08:00

    The option is not available for the 8 bay version, only on the 12 bay.  The twelve bay R510 allows for 2 additional 2.5" cabled drives that are not hot swap capable.

    Hope this answers your question.

    Regards,

  • theflash1932

    11 Legend

    •

    16255 Posts

    3912

    1

    Posted July 31st, 2012 09:00

    Only the 12-drive backplane will support two cable drives.  The reason?  Only the 12-drive backplane has the connectors to do so (between the last sets of slots):

    http://www.notebookparts.com/images/fullsize/Y776M_fs.jpg

    The 8-drive backplane does not have these connectors:

    http://www.stuartconnections.com/10770-thickbox/Dell-PowerEdge-R510-X8-SAS-Riser-Backplane-Board-Y775M-X836M.jpg

  • 3912

    1

    Posted July 31st, 2012 09:00

    Here you go:

    M300P Cable Assembly -- Backplane to Internal 2.5" HDD (Bottom Drive, HDD 13 - For Mack 12 only)

    Regards,

  • TedLarsen

    1 Rookie

    •

    22 Posts

    3912

    0

    Posted July 31st, 2012 09:00

    Thanks Gentlemen.  Appreciate the information.  one more quick question....We have a 12-bay unit that we purchased "used" that did not have the internal drive bay caddy included.  I found a replacement for the drive caddy, but my next question is about the cable;  The server is currently in production and I can't take it offline to get a better look inside right now....what kind of cable is used to connect these drives to the backplane?  Is it a special cable?