UNSOLVED

MikeLApprise

updated

15 years ago

0

89723

September 2nd, 2011 09:00

Poweredge 2950 random reboots getting more and more frequent

Hello,

My company has a Powedge 2950 that has been randomly rebooting. Originally it happened about 4 months apart, then 1 month apart, then weeks apart, and now several times a week. I can trace these reboots back to January 2011. I found some similar problems here on the forum but it seems everybody's case is unique to their situation. So here are the details on my situation:

The server is used as a terminal server for people in our office. It is accessed from the US, China, and Europe. Here are the system details:

OS: Windows Server 2008 Enterprise (6.0, Build 6002)

System Model: Poweredge 2950

BIOS: Phoenix ROM BIOS PLUS Version 1.10 2.7.0

Processor: Intel(R) Xeon(R) CPU  E5440 @ 2.83Ghz (8 CPUs), ~2.8Ghz

Memory: 16378 MB RAM

Page File: 5557MB Used, 27357MB Available

System Type: 32-bit Operating System

The Event viewer shows no helpful information other than 6008 errors saying "The Previous system shutdown was unexpected"

No dump files to look at either

I updated drivers on the machine a few weeks ago and that did not seem to help

I don't believe its temperature related as we have temp sensors in the server room that have not been tripped

It shares a power supply with several other servers and none of them are experiencing this same problem, some of them are also PE 2950's.

I have not run memory diagnostics yet because that will require rebooting the server which I can't do during the day,

Any troubleshooting ideas to try while the server is running? or is it time to schedule downtime and work on it while its off?

If I can provide more information about the machine that would help let me know.

Thanks in advance, any ideas are welcome

  • DELL-Chris H

    7 Practitioner

    •

    9682 Posts

    •

    48046 Points

    2886

    0

    Posted September 2nd, 2011 09:00

    With the issue you are having, you would need to start off verifying the BIOS and ESM are current. After those are updated, you will need to right click on My Computer and then properties. Then click Advanced Settings - Start up and Recovery- then ensure that the Auto Restart is not checked. If the reboot is a Blue Screen of Death then it will remain on screen and you can retrieve the stop code.

    If it reboots without a BSOD then take the server to a minimum to post configuration and see if it reboots under those conditions.

    Min to Post (remove everything but the following)

    System board

    Processor (with heatsink) in socket 1

    Two sticks of memory in memory slots 1 and 2

    1 power supply

    Control panel (to turn on system)

    Sideplane

    Both PCI risers; PCI-e in center slot, (PCI-e or PCI-X) in left slot

    If it doesn't reboot in this setup then add devices, one at a time until the reboot reoccurs.

    Let us know how it works out.

    DELL-Chris H

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!

  • JOHNADCO

    2 Intern

    •

    847 Posts

    2890

    0

    Posted September 2nd, 2011 11:00

    I know it is a bit of a canned answer,  but I would reseat the procs and memory.   We had a 2970 recently that started doing this after moving it to a different area on the rack.    I even scoffed a little at the dell tech that suggested the re-seating,  but we did it and it has not done it in several months now.   It also seemed ot be getting worse and worse over time.

  • 2890

    0

    Posted September 2nd, 2011 12:00

    OK thanks for the tip John, its good to hear from people who had similar issues and resolved them, ill give it a shot

  • theflash1932

    11 Legend

    •

    16255 Posts

    2890

    0

    Posted September 2nd, 2011 20:00

    Do u have any entries in your ESM/hardware log?

  • 2890

    0

    Posted September 12th, 2011 07:00

    Installed BIOS and ESM drivers about a week ago even though the installers for both said they were already up to date. We also reseated all RAM and processors, I'll keep this forum posted with any new updates

  • 2890

    0

    Posted September 14th, 2011 13:00

    Did the reseating and drivers on 9/2/2011 and that lasted until 9/14/2011 when it just rebooted itself again

  • 2890

    0

    Posted September 14th, 2011 14:00

    ESM/Hardware log has no errors. However, the Alert log shows Event ID 2131 after the last 2 shutdowns, this error reads:

    The current firmware version 6.0.2-0002 is older than the required firmware version 6.2.0-0012 for a controller of model 0x1F0C: Controller 0 (PERC 6/i Integrated)

    Is this possibly the cause of the random reboots?

  • theflash1932

    11 Legend

    •

    16255 Posts

    2890

    0

    Posted September 14th, 2011 15:00

    The reboots could be a storage issue, but the message doesn't mean that is the cause.  The message will appear regardless of any problems.  That said, there could be a firmware bug that could be resolved by a firmware update.  Can you export the controller log for review?  (OMSA, Storage, PERC, Information/Configuration, Export Log from dropdown.  Are there BSOD's that correspond to these reboots?

  • 2890

    0

    Posted September 14th, 2011 15:00

    Don't believe there are any BSOD, this is a terminal server, the reboots seem to be happening in the middle of the night in the US, when this server is heavily used in China, It seems to just kick the users off, no BSOD or anything.

    How do I get you the log file, just paste it in the forum? is there an upload feature I'm not seeing

  • theflash1932

    11 Legend

    •

    16255 Posts

    1064

    0

    Posted September 14th, 2011 15:00

    I thought there was (maybe there used to be) a file upload option (if you click on Rich Formatting), but right now there just seems to be one for Images and Video.  Can you make it available on a website/ftp/dropbox?