UNSOLVED

mcs2000

updated

22 years ago

M

mcs2000

3 Posts

0

10055

June 28th, 2004 12:00

Poweredge 1600sc - monitor dark after re-boot

Hi forum!

I am facing a quite ridiculous problem. - Unfortunately the only manual I have and the ones which are available online give no hints on it (or I am not able to find it).

So, here's what I'm talking about:

After a power failure we re-booted our Poweredge 1600SC (running W2k Server). The next day (today) I wanted to change some settings.

The server is working and everything seems to be fine, except for the video output. The monitor remains dark while it is working properly when connected to other computers.

To considering a damaged graphics card I would prefer that the problem is caused by a power management issue. But, which of the buttons on the front panel can I press without risking another re-boot? There are always many users on the machine, which of course should not be kicked off if possible.

Thanks for your answers.

Markus

  • mcs2000

    3 Posts

    169

    0

    Posted July 2nd, 2004 06:00

    Hi all,

    in lack of any better ideas I finally decided to press the power button shortly.

    For your records: Pressing the power button shortly results in an immediate shutdown.

    Best regards,
    Markus

  • Jenny_SHI

    8 Posts

    169

    0

    Posted July 9th, 2004 02:00

    I have a same problem, even worse.  My 1600sc was tunning ok and did some configuration and then restart it. Since then 1600sc dead. The monitor was dark -- no signal to monitor. First of all I think the graphic card has problem, but it seems not. I took CPU, memory off the motherboard and start the 1600sc --- no beep even.

    Right now I am thinking the motherboard is dead (called Dell, the charge for a new motherboard is $600!!!!!)

    Any ideas?