UNSOLVED

ex-engineer

updated

16 years ago

EE

ex-engineer

1 Rookie

•

10 Posts

0

12915

June 21st, 2010 21:00

NIC TEAMING QUESTIONS

HELLO:

 

I have 3 separate questions,.

 

(1)  (a)  Imagine I have a server with 2 BROADCOM NICs and I want to team them. If NIC 1  is connected to access switch 1 and NIC 2 to access switch 2, the only  NIC teaming methodology that can be used is one in which one NIC is active and the other is in standby. The reason is that you would have a  loop if both NICs were active (assuming L2 adjacency between switches). Is that part about the loop correct? If so, the way to get away from the loop is to have access switches, like  the Nexus 5000, that does vPC. Correct? SEE THE  BELOW DIAGRAM.

 

     (b) If there is indeed a loop, which mechanism causes one NIC uplink to be active and the other to go standby. Its not STP. The NICs are connecte to  access ports.


(2) What about 2 separate NICs, as in  the first scenario, BUT the two access switches are stacked, like two  3750s?

 


(3) What  about the case where you have one dual-port NIC with  the same uplink connections to the two switches and no vPC or stacking?  Still be a loop?

 

May I please have 3 separate answers?

 

 

Thanks

  • CFTLLC

    13 Posts

    503

    0

    Posted June 23rd, 2010 09:00

    1 Have you looked into the Broadcom Advanced Control Suite (BACS), it has a feature called BASP that allows you to form multiple teams, but be warned MS is does not support teaming and I have had issues with it as well.

    2 If the switches are stacked you should only need to connect to one port of the stack unless you teamed the NICs.

    3 I don’t think there would be a loop if unless another device with multiple NICs was connected to both switches.