We just purchased this new PowerEdge 600SC and found that it came with a different kind of PCI slot (PCI-X? maybe) with the "key" in the slot close to the plate (opposite of the normal).
Just wondering how can we put a sound card in the box? We need a sound card for some programs.
The PCI slots in the PowerEdge 600 SC are all 3.3 volt slots which is the reason for being keyed differently.
Dell does not officially support sound cards in PowerEdge Servers. However, if you can find a sound card compatible with the 3.3 volt PCI slots, it should work.
I have this SBLive 5.1 and it works with 600SC as well; Audigy is way too overkill for what I need. There are many of these cards for auction on Ebay. But be careful as not all SBLive are 3.3V compatible (look for the front gap near the connector end of the PCI card; my very first SBLive card does not)
I just purchased a 1600SC server for audio production and this thread has me worried! Can I install my special audio cards (Ensoniq EDS-1000) into this system. The documentation says these are 5v cards and I need space for three of them. They DO NOT HAVE the special little tooth at the front.....
DELL-Mark A
2 Intern
•
2521 Posts
676
0
Posted September 21st, 2002 13:00
The PCI slots in the PowerEdge 600 SC are all 3.3 volt slots which is the reason for being keyed differently.
Dell does not officially support sound cards in PowerEdge Servers. However, if you can find a sound card compatible with the 3.3 volt PCI slots, it should work.