Hi Team, I am using "2 x Xeon 64gb RAM Dell R730 2TB HDD" and installed ESXi6.5 into it. My entire network is controlled by a firewall which is also a VM installed under this particular ESXi, accidently we shutdown the firewall, hence we cannnot access the entire network. Now we planned to arrange an engineer to the data centre where this Dell R730 is deployed, Could you please help me how to access the ESXi directly from the Dell server? Which port we can connect a laptop? and further procedure as well.
When you connect a monitor you will get Direct Console User Interface. On this screen you need to enabled ESXi shell. You can follow below link to enabled ESXi shell
I can't take my Host ESXI console as well because the remote connection to the host itself managed by the Firewall which is down now. This is a single point of failure in our network. So if an engineer have access to the physical server, how can we access the host console from the dell server console?
We don't have information whether the iDRAC is configured, only knows the ESXi IP address(Will that be same as iDRAC IP?). Also the ESXi is managed using localhost only, not a public ip is given
Yes. If its not possible to gain network access or trough iDRAC a tech need to hook up a monitor and keybord(no mouse needed).
If the ESXi is already booted he needs to verify if "Shell access" is already enabled (its not the default!) in the Troubleshooting Option menu and when not he need to enable it. After that he can access the shell by pressing ALT-F1.
vim-cmd vmsvc/getallvms | grep -i
will return some infos and in the first field there will be a ID.
vim-cmd vmsvc/power.on
will be power on the VM.
Another solution will be the following. If you are sure that the needed VM is in the list of VMs which are enabled for autom. start/shutdown and the whole option is enabled you can powered down the ESXi Host by pressing the power button or simply pull the cables. ESXi Host will be restart and all VMs from the list will be startup.
Can we use a Laptop instead of Monitor and Keyboard? If yes , do you have any idea which port we can connect? We used to ssh to the ESXi host normally, but From the server how we will navigate to ESXi shell? The ESXi is up and running only, one of the VM(Firewall is powered off, which we have to power on). How to navigate to Troubleshooting Option in Dell server?.
Really sorry for the bundle of querries, actually this is the first time we are troubleshooting from server infra.
DELL-Shine K
6 Operator
•
3042 Posts
2212
1
Posted September 13th, 2021 01:00
When you connect a monitor you will get Direct Console User Interface. On this screen you need to enabled ESXi shell. You can follow below link to enabled ESXi shell
https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.security.doc/GUID-94F0C54F-05E3-4E16-8027-0280B9ED1009.html
Once enabled you can press Alt+F1 on Direct Console User Interface which will take you to ESXi shell where we can run commands to power on the VM