kurianlinu

updated

5 years ago

K

kurianlinu

18 Posts

0

2962

September 9th, 2021 19:00

Dell R730 console access to installed ESXi6.5

Hi Team,
I am using "2 x Xeon 64gb RAM Dell R730 2TB HDD" and installed ESXi6.5 into it. My entire network is controlled by a firewall which is also a VM installed under this particular ESXi, accidently we shutdown the firewall, hence we cannnot access the entire network. Now we planned to arrange an engineer to the data centre where this Dell R730 is deployed, Could you please help me how to access the ESXi directly from the Dell server? Which port we can connect a laptop? and further procedure as well.

Thanks,
Linu

  • DELL-Shine K

    6 Operator

    •

    3042 Posts

    2212

    1

    Posted September 13th, 2021 01:00

    When you connect a monitor you will get Direct Console User Interface. On this screen you need to enabled ESXi shell. You can follow below link to enabled ESXi shell

    https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.security.doc/GUID-94F0C54F-05E3-4E16-8027-0280B9ED1009.html

    Once enabled you can press Alt+F1 on Direct Console User Interface which will take you to ESXi shell where we can run commands to power on the VM

  • DELL-Shine K

    6 Operator

    •

    3042 Posts

    1354

    0

    Posted September 9th, 2021 19:00

    You can try the same remotely, if your server have iDRAC enterprise and you have access to iDRAC IP address.

  • DELL-Shine K

    6 Operator

    •

    3042 Posts

    1354

    0

    Posted September 9th, 2021 19:00

    You can try powering on the VM from host console. Below link have the details and commands for the same

    https://kb.vmware.com/s/article/1038043 

  • kurianlinu

    18 Posts

    1353

    0

    Posted September 9th, 2021 21:00

    I can't take my Host ESXI console as well because the remote connection to the host itself managed by the Firewall which is down now. This is a single point of failure in our network. So if an engineer have access to the physical server, how can we access the host console from the dell server console?

  • kurianlinu

    18 Posts

    1353

    0

    Posted September 9th, 2021 21:00

    We don't have information whether the iDRAC is configured, only knows the ESXi IP address(Will that be same as iDRAC IP?). Also the ESXi is managed using localhost only, not a public ip is given

  • DELL-Shine K

    6 Operator

    •

    3042 Posts

    1336

    0

    Posted September 10th, 2021 04:00

    Then you can connect monitor and keyboard to the server and try to power on the virtual machine using the link I given in my previous post.

  • Origin3k

    6 Operator

    •

    2424 Posts

    •

    12408 Points

    1315

    1

    Posted September 11th, 2021 10:00

    Yes. If its not possible to gain network access or trough iDRAC a tech need to hook up a monitor and keybord(no mouse needed).

    If the ESXi is already booted he needs to verify if "Shell access" is already enabled (its not the default!) in the Troubleshooting Option menu and when not he need to enable it. After that he can access the shell by pressing ALT-F1.

    vim-cmd vmsvc/getallvms | grep -i 
     

    will return some infos and in the first field there will be a ID.

    vim-cmd vmsvc/power.on 
     

    will be power on the VM.

    Another solution will be the following. If you are sure that the needed VM is in the list of VMs which are enabled for autom. start/shutdown and the whole option is enabled you can powered down the ESXi Host by pressing the power button or simply pull the cables.
    ESXi Host will be restart and all VMs from the list will be startup.

    Regards,
    Joerg

  • kurianlinu

    18 Posts

    1299

    0

    Posted September 12th, 2021 10:00

    Can we use a Laptop instead of Monitor and Keyboard? If yes , do you have any idea which port we can connect? We used to ssh to the ESXi host normally, but From the server how we will navigate to ESXi shell? The ESXi is up and running only, one of the VM(Firewall is powered off, which we have to power on). How to navigate to Troubleshooting Option in Dell server?.

    Really sorry for the bundle of querries, actually this is the first time we are troubleshooting from server infra.

     

    Thanks,
    Linu

  • DELL-Shine K

    6 Operator

    •

    3042 Posts

    1284

    1

    Posted September 12th, 2021 18:00

    If you have Enterprise license on iDRAC, You can access the iDRAC using from USB (iDRAC Direct) port and use it to access the console of the server

    You can refer below link to get details on iDRAC Direct port. there will be wrench symbol on this port.

    https://www.dell.com/support/manuals/en-us/poweredge-r730/r730_ompublication/3.5-inch-hard-drive-chassis?guid=guid-cf7676b4-eb53-47a8-8ffb-34a74ca4f4a4&lang=en-us 

    You can refer below link on details on how to access iDRAC using this USB port

    https://www.dell.com/support/manuals/en-us/idrac9-lifecycle-controller-v5.x-series/idrac9_5.00.00.00_ug/accessing-idrac-interface-over-direct-usb-connection?guid=guid-2c43a175-3dd3-4a12-b747-d17c08e5bef6&lang=en-us

    Refer below link on accessing ESXi shell from host. From console you can press Alt+F1 to access ESXi shell

    https://kb.vmware.com/s/article/2004746 

  • DELL-Young E

    Moderator

    •

    5421 Posts

    •

    37 Points

    1284

    0

    Posted September 12th, 2021 19:00

    I agree with Shine’s answer. iDRAC virtual console would be helpful.

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!