UNSOLVED

timfawcett

updated

14 years ago

0

7489

March 12th, 2013 08:00

1950 Battery Status

Hi - we have a PE1950, approximately 4 years old, with a DRAC5 card installed.  In the DRAC interface, the batteries both show as 'good' (see screengrab).  We also monitor this server with BMC Portal, and that is reporting a battery problem, as per the message below.  Do I have faulty battery, or a spurious error message?

BMC error:

Status: WARNING! (Problem: This battery is degraded. Reported status: Learning)

Status report
***********
Monitored object: BAT-1 (DELL - Battery 0)
Type: Battery
DeviceID: 1

Parameter: Status (Currently in WARNING state)
*********
Current value: Degraded
Unit : OK ; Degraded = Warning ; Critical or Missing = Alarm
Current state: WARNING

Thresholds (Default):
- If Status value has degraded: Trigger a WARNING
- If Status value is Critical or Missing: Trigger an ALARM

Problem: This battery is degraded. Reported status: Learning
Consequence: Check that number of allowed recharges has not been exceeded and that the current full charge capacity (FCC) is close to the full charge capacity of initial battery.
Recommended action: The battery needs to be replaced or reconditioned.



















  • DELL-Chris H

    7 Practitioner

    •

    9682 Posts

    •

    48046 Points

    547

    0

    Posted March 12th, 2013 08:00

    Tim Fawcett,

    I would start by verifying that the ESM and the Perc controller are up to date.

    This is the current ESM version - www.dell.com/.../poweredge-1950

    What controller is installed? The PErc 5/i, 6/i, or SAS 6/ir? Let me know and I will get you the links.

    Also, in the battery on that page, what does the learn cycle count show as?

    DELL-Chris H

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!