I doubt any bios version supports 5.25 in this model. flashing backwards to earlier bios version can be risky.
you probably need a pentium III based motherboard to support 5.25 floppy, such as Dell xps T700(r). the spec needs to mention 5.25 diskette such as this one:
Externally accessible bays
5.25-inch bays for diskette, tape, or CD-ROM drives 3.5-inch bays for diskette or tape drives
There are tricks but they are not free. from howtogeek.com:
A small company called Device Side Data manufactures an adapter called the FC5025. It allows you to use an internal 5.25-inch floppy disk drive to copy data from 5.25-inch disks in various formats over a USB cable to a modern PC. The board costs around $55.
Thank you if all else fails I will likely buy one of those. I "thought" the GX260 supported 5.25" drives in bios, and have the physical drive, data cable, and power cable so was hopeful of avoiding any extra costs... I could have SWORN I had hooked up a 5.25" drive to a desktop GX260 before, but my mind may be slipping..........
I might try GoodWill they probably hav some donations that still have 5.25" drives
"I doubt any bios version supports 5.25 in this model."
That statement is false and has nothing whatsoever to do with BIOS updates or not.
MSDOS and 1.2 1.44 floppy drives have been supported by ALL DELL models from the PC's Limited Turbo model all the way thru Optiplex 360 760 960 models. MSDOS and Windows 3.11 work fine up to about Optiplex GX620 because after that models no longer have MSDOS VESA Video Bios or Chipsets. I have been using MSDOS since 1981 and the IBM PC, and MSDOS on a Dell Since the PC's Limited Turbo PC from 1985.
Most Dell models from 1995 to about 2007 work fine with 1.2 gig, 1.44 gig floppy drives and disks. Including but not limited to GX110, GX200, GX240, GX260, GX280, GX620, GX745, GX755, GX760. Past that the connector is removed to support internal floppy HOWEVER USB floppy drives work fine for GX780 GX790. Series usually have 300 700 900 so GX380, GX780, GX980 etc.
Post pictures of your cable and drive where the jumpers are. It may be as simple as changing the drive select from 0 to 1 where there are 3 settings but only 1 jumper for each position.
5.25 INCH drives work fine but NOT with Windows Vista, 7, 8, 10
What you need is an Optiplex tower, A dual floppy 34 pin ribbon cable, and a 1.2 gig 5.25 inch drive with the floppy drive select jumper set so that the twist in the cable is what selects the drive.
You will also need a Green or Skyblue OEM XP CD to install XP so that the drivers and format etc will work without issue. Newer versions of windows will try to WRITE to your DISKETTES So make sure to write protect them or they will be hozed when you try to read them.
Mostly I recommend an Optiplex GX620 Tower for these operations because the GX620 is special.
It can run all OS from MSDOS all the way to WIN10 without issue once the bios is A15 and the Region is set for the optical drive. It also runs Linux from early builds like Puppy 5 to Ubuntu 20.04 LTS.
The floppies from 1965-1985 pre date MSDOS 1.0 from 1981.
5.25 and 8 inch floppies can retain data for decades which is why our Nuclear force still uses them for launch codes. Same with magnetic tapes if kept in cool dry place thats magnetic shielded.
No Idea where others who posted about bios ability to support floppies came from since 1.2 gig and 1.44 gig drives were supported in 1995 with windows 1.0 2.0 3.0 and MSDOS 3.XX - 6.22 etc along with Digital Research Dos and IBM DOS 7.0
Freedos also supports those media types. The 3M 100 meg super disks and 2.88 floppies were more generic because those came in USB and IDE formats like the ZIP drives did. Zip drives and Iomega died out before vista/7/8/10.
XP was the last DOS that supported Dual boot with WIN9X dos on FAT32 and had a create bootable msdos floppy option in the os. Before 1981 I used Apple Dos from 1977 as well as CPM from 1979 to 1981.
redxps630
11 Legend
•
16431 Posts
•
83176 Points
2306
0
Posted December 29th, 2021 10:00
I doubt any bios version supports 5.25 in this model. flashing backwards to earlier bios version can be risky.
you probably need a pentium III based motherboard to support 5.25 floppy, such as Dell xps T700(r). the spec needs to mention 5.25 diskette such as this one: