We have some Optiplex 7050s that do not present the TPM section in BIOS setup. From the order details, it seems they were ordered with 'TPM not enabled':
340-AFPJ : TPM Not Enabled PART NUMBER DESCRIPTION QUANTITY GVH5N INFO,TOKEN,DTP,NO-TPM,WW 1
However I wouldn't think 'not enabled' would be the same as 'deleted'? But we have a few in this same state and that seems to be the case. We also have many others that were ordered with TPM enabled and they work fine, as expected.
So far I've tried without success to:
Upgrade BIOS to latest
Downgrade BIOS to several older revisions
Clear CMOS settings with jumper
Clear CMOS by removing backup battery
'Hard reset' by removing power and holding power button for 30 sec.
Nothing has caused the TPM settings page to appear in BIOS setup. I'm pretty certain that this is some factory setting but I'm hoping there's some way to change/revert it? Any help?
In the BIOS should be a setting for PTT. Make sure that it is enabled. This web page has more information on Intel's Platform Trust Technology. PTT offers the capabilities of TPM 2.0.
I am not a Dell employee...I am forum volunteer
Serious work on an E5430 and constantly building and working on an i5-6500 Desktop
Check that BIOS is set to UEFI and SecureBoot is Enabled.
Also, that boot-drive was initialized as GPT.
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired) - Like many of you, I can appreciate a good game-engine. - I answer questions here, but I'm not a Dell employee. - Consider giving posts you like a "thumbs-up" - Posting models-numbers and software versions speeds trouble-shooting. - Click "Mark as Accepted Answer" on any post that answers your question best.
Note: If the TPM is not seen in the BIOS, a hard reset is required to bring it back online.
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired) - Like many of you, I can appreciate a good game-engine. - I answer questions here, but I'm not a Dell employee. - Consider giving posts you like a "thumbs-up" - Posting models-numbers and software versions speeds trouble-shooting. - Click "Mark as Accepted Answer" on any post that answers your question best.
Updating TPM firmware isn't possible until the TPM is available/showing in BIOS. I've tried several 'hard resets' which have not helped. While the symptom is the same (TPM page missing from BIOS) I believe the cause is something different, ie something disabled at the factory.
That may be true. I figured it might be a long shot but thought I'd ask anyways. However 'TPM not enabled' sounds similar to 'RAID not enabled'. IE the feature isn't deleted, just not turned on out of the box. I can physically see the TPM chip on the motherboard so I know the hardware is there.
The machines in question were bought by and shipped to a USA location so I don't think it's an export/locality issue as you mentioned.
Hi @bhnelson, I believe I have the identical no-TPM issue you describe with the 7050MT. Have you found a solution to date? Or how will you work around this?
If you don't mind, I'd like to pose a couple questions of my own. If anyone can answer one of these, please do:
When an OptiPlex is ordered with "GVH5NL: TPM Not Enabled", is that permanent, i.e. it can never be reversed?
What does the factory do, flash something to keep TPM from working, or add/omit/remove a part to the motherboard?
When a 7050MT does come with an active TPM, is that a discrete (on-board), or based on the CPU's firmware? (See also my following post.)
>> I can physically see the TPM chip on the motherboard so I know the hardware is there.
Oh, could you point that out on the motherboard? Here's a Dell image from the manual, or I can identify it if you've got a photo of the chip and a few landmarks around it.
JOcean
11 Legend
•
12621 Posts
•
69453 Points
2862
0
Posted March 7th, 2022 18:00
In the BIOS should be a setting for PTT. Make sure that it is enabled. This web page has more information on Intel's Platform Trust Technology. PTT offers the capabilities of TPM 2.0.
I am not a Dell employee...I am forum volunteer
Serious work on an E5430 and constantly building and working on an i5-6500 Desktop