UNSOLVED

TonyZi

updated

23 years ago

T

TonyZi

1 Message

0

9598

May 18th, 2004 14:00

Truemobile 1450 with Linksys WRT54G Troubles

I’m having trouble connecting to my home network with the Dell Wireless 1450 DualBand (802.11a/b/g) Internal Wireless card, using the Linksys WRT54G router.  It appears to connect, saying it’s getting an excellent signal at 54mps, but cannot get an ip address or connect to the network. 

>ipconfig /renew does nothing and I cannot ping the router although it says I’m receiving a signal.

I installed the latest firmware on the router as well as downloaded the most recent drives from Dell and still had the same issues.

I borrowed a card from my wife’s laptop and it connected with no problems. 

I also have no problems connecting to the Linksys BEFW11S4 router at my office, so it leads me to believe that there is a compatibility issue between the 1450 and the WRT54G.

I was wondering if anybody else has similar issues or has a fix for this problem.

Thanks

  • SumGai

    2 Posts

    249

    0

    Posted May 25th, 2004 00:00

    I have the same card in a laptop I just received and the same router, and I'm also having problems.  I can view our wireless network under "Available Networks," but when I try to connect to it, it will not work.  In fact, not only will it not connect, but it actually brings down the router so that no other computers can access the internet anymore (wireless or hard line).   Simply unplugging the router for a while and then plugging it back in fixes this, but it still doesn't seem right. 

    The laptop connected instantly when I wandered over to the local Panera.  And I have another Dell laptop that can connect to the network just fine.  The difference there is that it has a LinkSys wireless card.    All the settings are identical to my 1450 mini-PCI card though.

    Additionally, I can set up an ad-hoc network between the two laptops with no problem.

    So did I end up with a card that is incompatible with my wireless router?  That's pretty annoying, if so.   There seem to be quite a few posts about compatibility with LinkSys products in the forums, so I would've appretiated a warning from Dell before I paid for it.

    Message Edited by SumGai on 05-24-2004 09:12 PM

  • jwatt

    4446 Posts

    249

    0

    Posted May 25th, 2004 03:00

    I can view our wireless network under "Available Networks," but when I try to connect to it, it will not work. In fact, not only will it not connect, but it actually brings down the router so that no other computers can access the internet anymore (wireless or hard line). Simply unplugging the router for a while and then plugging it back in fixes this, but it still doesn't seem right.

    Ouch! :-) In some reported cases, updating the firmware on the router has cured problems like this. Have you tried that?

    The latest release of firmware for the WRT54G Version 2 seems to be 2.02.7, dated 3/17/2004. Note that there are several versions of the WRT54G. This is the link for Version 2.

    Also note that compatibility statements don't take software/firmware bugs into account. Both devices are listed as compliant with the relevant 802.11 standards.

    I wonder what access point Panera is using at the location you visited!

    Jim
  • Microcon

    1 Rookie

    •

    14 Posts

    249

    0

    Posted June 21st, 2004 22:00

    I just bought the 1450 and a Linksys WRT564G router and have it working currently.  This signal is Good to Very Good when I am sitting within 5 feet of the router, but when I go downstairs, the signal all but disapperas.

    I am looking for some ways to boost the signal, but as far as connectivity it is working perfectly.

    Yours is clearly a setting on your 1450 so I would concentrate on the Wireless Network Properties in the WLAN card utility.  This is probably not much help, but it's where I would start.

  • SumGai

    2 Posts

    249

    0

    Posted June 21st, 2004 22:00

    New drivers did, indeed, fix the problem.  Drrrr, most obvious thing works of course.  I just didn't want to bring the family's network down since my dad uses it for work.

    Yeah, now that my card works, I've found that it can't stray far from the access point.  My laptop has a range at least 40 feet shorter than all the other wireless laptops that have been brought to my house.  Oh well, at least it works.

  • Microcon

    1 Rookie

    •

    14 Posts

    249

    0

    Posted June 23rd, 2004 03:00

    I found that I had much better reception when I moved the WAP to the basement (near the ceiling) from the second floor.  Sitting right above it, one floor up, I'm getting Excellent reception. 

    --------------------------------------------------------------------------------
    Latitude C840 P4-M, 2.4 Ghz
    Broadcom 1450 802.11a/b/g WLAN

  • jwatt

    4446 Posts

    249

    0

    Posted June 25th, 2004 16:00

    Regarding the link you show for the latest firmware version, do I load this on my laptop or on my main (hardwired) computer?

    tunder1,

    It's always better to install router firmware updates using a hardwired connection to the device being updated. But if you're working directly with Linksys, I'd follow their advice about what update to install.

    Jim
  • tunder1

    2 Posts

    249

    0

    Posted June 25th, 2004 16:00

    Regarding the link you show for the latest firmware version, do I load this on my laptop or on my main (hardwired) computer?

    Also, I too am having the same kinds of problems everyone else is experiencing, especially the one about dropping the signal and all the computers connected to the router lose the internet connection.

    I have spent several "days" with the Linksys technical service department and they seem to be as confused as I am about what is really causing the problem.

         1.  I was advised to go to the Linksys website and download the firmware upgrade.  When I did this, their own website was not available for downloading this upgrade, which made me very suspicious.  They then e-mailed me a link to upgrade, but I needed to download a winzip extractor just to be able to do this  (which I haven't done yet; I'm paranoid).

         2.  I did change my channel setting to 1, move my 2.4 Ghz Siemens phone to the front of the house and since last night until now (10AM PST), I haven't had any problems.  CROSSING FINGERS!!!

    If somebody out there has actually talked with Dell about 1450 compatibility issues with WRT54G, I would like to hear what they had to say.

  • 249

    0

    Posted August 13th, 2004 05:00

    Good news!

    A few days ago, Linksys posted another firmware update (version 2.04.4) for the WRT54G wireless routers.  See http://www.linksys.com/download/firmware.asp?fwid=201.  Once I updated the firmware in my WRT54G (v1.1 hardware), my connection and range problems with both notebook adapters were resolved.  These adapters are: a Linksys WPC54G in a Sony laptop and a Dell TrueMobile 1450 installed in a D600.  (I also updated the D600 with the latest TM 1450 driver from the Dell Support website.)

    Hope others have the same kind of success with this upgrade...

    Peter

    Message Edited by ptrobinson on 08-12-2004 11:29 PM

  • Microcon

    1 Rookie

    •

    14 Posts

    249

    0

    Posted August 13th, 2004 12:00

    Since I moved my router downstairs, I have had much success.  However, I have learned a little more in the past few months.

    I often use my laptop in the kitchen near the microwave and our wireless house phones.  In one location, both the phone and the microwave (when they are in use) kill my wireless connection instantly.  I am about 12 feet away from both.

    However, in another position in the kitchen, where I am about 5 feet from the phone/microwave, my connection is not affected by either one.   I think there are two possible reasons for this:  First, in the second location, I m a little closer to the router which is in the basement, so I get a stronger signal.  But perhaps more importantly, in the first location, the microwave and phone base are between my laptop and the router.  In the second location, the microwave and phone are in the opposite direction from the router.  It may not make sense technically, but it works for me.