Recently I had a power surge at home. I have a Dimension 3000 with an intel pro/100 ve network connector on the mother board. I am able to send packets but not receive packets. I have put in another network card thinking it might be the network adapter, however the same problem exists. I know it is not the cable either because I have successfully connected with a different computer using the same cable. Does anyone know how to fix this problem? I have been told it is a software problem.
To help troubleshoot this problem, go to Start > Run and type cmd then click OK. In the command prompt window that opens, type ipconfig /all then hit the enter key. Write down the output from this command or select it and save it to a txt file, then copy this output into a reply to this message.
You are not getting a valid IP address, thus you are not making a connection with the interet. First try downloading and running winsockfix for Windows XP from the Here and if that doesn't work try lspfix from Here. If that doesn't work, go into Network Connections and remove the Toredo Tunneling Adpater. I've seen that mess up the internet connection. Is there a reason why you have that installed?
Thanks Steve I will try the downloads you suggest. I have no idea about the Toredo Tunneling Adpater and why it is installed. But I believe I may have an idea about the reasons for my problems. I recently cancelled my dial up connection for a braud band wireless modem solution. When the deactivation of the dial up took affect was about the time of my problem. The ISP for dial up had given me a speed up program, called rocket access, that I believe is causing my issues. I will let you know if things get fixed after running the downloads. Thanks again for your help. PS I am going to contact the dial up isp and let them know what kind of problems they caused me. oh how do I get rid of the Toredo Tunneling Adpater?
I have no idea how this got installed on your computer (I don't have it on any of mine). But it comes as a part of IPv6. A FAQ that contains instructions for removal can be found at:
See if your dhcp client service is running. To do this go to Start > Run and type services.msc then hit the Enter key. Find the dhcp client service in the list, double click on it, then make sure it is running and set to autostart.
DHCP Client is running and set to automatice. I also noticed that after I performed the fixes you listed and removed the IPv6 stuff the ipconfig/all report was significantly different from when I ran it the first time. The report stopped after Default Gateway: I noticed in another message thread that you said this was not the complete file, however the information I had returned was the same status as the report listed in that message. Is it just me or is this problem one that is occuring a lot since the end of March???
I have done the system restore and have not added any of the critical updates in a couple of months. Should I resort to having the system wiped and reloaded? I am about at my wits end. Do I have any other options?
volcano11
2 Intern
•
27973 Posts
397
0
Posted April 19th, 2006 02:00
To help troubleshoot this problem, go to Start > Run and type cmd then click OK. In the command prompt window that opens, type ipconfig /all then hit the enter key. Write down the output from this command or select it and save it to a txt file, then copy this output into a reply to this message.
Steve