I just got this computer, and haven't installed anything yet. As soon as I boot it up I notice not a single wi-fi server in my area is popping up in the scan when usually my computers and wi-fi devices can detect about 6. So I updated windows 7 - no change, brought it within range of my Belkin router, checked firewalls, reinstalled windows, reinstalled/upgraded drives, etc, no change. I'm getting fed up, and it seems this is a common problem with Windows 7/This wireless card. I need help, or I'm going to be sending this tower back to dell soon because as far as I'm concerned right now my wireless card is busted. Right now I've hooked this desktop up to my old laptop via an ethernet cable to connect it to the internet (the laptop which is connected to the net via wi-fi and sees servers just fine). The router is hooked up for DHCP, and all my other devices, and roommate's devices - their computers (with windows7 who have the same settings as far as I can see), iphones, DS, nook, xbox, etc, recognize the server and connect through it just fine. Please don't tell me it's the router - and yeah, the firmware is updated. NONE of the servers in my neighborhood are popping up in the scan.
Ipconfig info:
Microsoft Windows [Version 6.1.7601] Copyright (c) 2009 Microsoft Corporation. All rights reserved.
Yes, my computer is set to automatically pick up the ip, but I just double checked again, and yeah, they still match.
I've checked the tcp/ip settings, and I have played with my router to death with everything from changing from wep to WPA, changing from 2.5 GHZ broadcast to 5, turning off or on the wi-fi protected setup, making it private so it doesn't broadcast the ssid, I even tried to set it up with a static ip (which in an apartment with 5 roommates, I can tell you isn't fun), and conclusion - it's not my router. Again, two of my roommates have computers with windows 7 and their computers pick up the belkin just fine, along with every other wireless device and phone in the house.
My new dell computer is not only NOT picking finding my Belkin wireless server, but NONE in the whole neighborhood when usually you can do a scan and see at least 6 (I live in Boston, you can't live in the city without having at least 6 wireless servers around your apt). NO wireless servers are being picked up by this computer.
The Belking router, I have had issues with another member when they used WPA Security. The Belkin could not determine between WPA-PSK(TKIP) Security (Personal) and WPA-AES. Did you try NO security or WEP Security?
Start, control panel, networking and sharing Center, click on your network connection, properties. Look for TCP/IPv4 and TCP/IPv6, then click on properties. Make your settings match mine.
Your desktop should be under warranty, contact Dell Tech support for help fixing this issue.
Rick
OS Name: Microsoft Windows 7 Home Premium OS Version: 6.1.7601 Service Pack 1 Build 7601 OS Manufacturer: Microsoft Corporation Original Install Date: 9/22/2011, 7:31:19 PM System Boot Time: 9/23/2011, 9:08:54 AM System Manufacturer: Dell Inc. System Model: Inspiron 620 System Type: x64-based PC Processor(s): 1 Processor(s) Installed. [01]: Intel64 Family 6 Model 42 Stepping 7 GenuineIntel ~2901 Mhz BIOS Version: Dell Inc. A00, 4/12/2011 System Locale: en-us;English (United States) Input Locale: en-us;English (United States) Time Zone: (UTC-05:00) Eastern Time (US & Canada) Network Card(s): 3 NIC(s) Installed. [01]: Realtek PCIe GBE Family Controller
Connection Name: Local Area Connection DHCP Enabled: Yes DHCP Server: 192.168.0.1
IP address(es) [01]: 192.168.0.17 [02]: fe80::6442:ead3:14c6:9cc9
I guess my computer is using McAffee, which I'm currently trying to remove (came with the computer) and firewall-wise, my computer is telling me McAffee is in charge of all firewalls.
Here's the system info:
Host Name: ALICEII
OS Name: Microsoft Windows 7 Home Premium
OS Version: 6.1.7601 Service Pack 1 Build 7601
OS Manufacturer: Microsoft Corporation
OS Configuration: Standalone Workstation
OS Build Type: Multiprocessor Free
Registered Owner: Aila
Registered Organization: Microsoft
Original Install Date: 9/22/2011, 7:31:19 PM
System Boot Time: 9/23/2011, 9:08:54 AM
System Manufacturer: Dell Inc.
System Model: Inspiron 620
System Type: x64-based PC
Processor(s): 1 Processor(s) Installed.
[01]: Intel64 Family 6 Model 42 Stepping 7 GenuineIntel ~2901 Mhz
I'm having the same problem. I bought the exact same model Inspiron 620(and I live in Boston too, but I digress)... In my case I can see wireless networks and connect to one, but then a few minutes later it disconnects me and says that there are no wireless networks available despite there being 40 listed a few minutes prior. I then have to let windows fix the connection, and it does the same thing a few minutes later. Not exactly what I expected from a machine thats less than a week old
Just got some time to work on this a bit more (working full time with classes) and finally managed to remove mcaffee, which sadly didn't change anything, but I needed to remove it anyway. Turning off all other firewalls caused no change as well.
When I reinstalled windows I didn't have a windows disc so I just used Dell Factory Image Restore in Windows 7. I suspected since the factory settings didn't have my wireless card working, no changes would happen with the wireless card, and I was right, still wasn't working after that but hey, had to try it. Seems the chipset drivers are fine though. I'm going to get my hands on a windows restore disc via one of my roommates who has windows 7 and reformatting the harddrive and reinstalling everything to see if that will work before I call up dell and have them send in a repair man/take it back.
Using Dell DataSafe™ Local Backup you should be able to make factory disks from the recovery partition. I would use them to install the operating system, if the recovery partition fails.
btw, no more annoying McCaffey on this computer anymore - so that wasn't blocking my connection either. No firewalls whatsoever. Why is it still not working?
PudgyOne
11 Legend
•
30315 Posts
•
106638 Points
1556
0
Posted September 23rd, 2011 11:00
Aila,
Try running Finding System Information REMOVE YOUR PRODUCT ID and post the rest of the information back here.
Also tell me which virus program and firewall you're using.
Rick