UNSOLVED

Lexmike

updated

21 years ago

L

Lexmike

13 Posts

0

6236

December 9th, 2005 17:00

Broadcom ethernet

I move my Inspiron 8500 in a lot of different environments and have need to use the Broadcom ethernet connection sometimes. Now all of a sudden, I get a message that a network  cable is unplugged when it isn't. I've reistalled the Broadcom drivers.  Any other ideas?
 
Thanks!
  • Lexmike

    13 Posts

    150

    0

    Posted December 12th, 2005 18:00

    Now I find it's a bad connection on the Inspiron. I can move it around and get connectivity. (This happens with several different cables) Any tricks I need to know when plugging it in?
  • mggeisen

    2 Posts

    150

    0

    Posted December 16th, 2005 02:00

    I have this same problem and I have no idea how to solve it.  Without even moving the connection will go and I'll have to keep wiggling the connection in the back until it no longer says, "A network cable is unplugged."  This happens with any cable I try and I feel like it keeps getting worse.  If anybody knows any solutions, please share.  Is it possible to replace the network card if necessary?  How much would something like that cost?  Unfortunately the laptop is no longer under warranty.

    Message Edited by mggeisen on 12-15-2005 10:57 PM

  • 150

    0

    Posted January 5th, 2006 14:00

    http://jroller.com/page/jigi?entry=more_on_broadcom_440x_nic
  • 150

    0

    Posted January 5th, 2006 14:00

    I have same problem. But no solution. It happens with Windows XP Pro, and Linux too.

    I think that this NIC is defective.

    I wrote broadcom for support. You should do same (so broadcom knows...) . If you find a solution, please share with me :)
  • 150

    0

    Posted January 6th, 2006 20:00

    I discovered this: when I move the display the problem occur. I think that there is some electrical contact that is not fully fixed.

    Someone does it know how can I unmount the laptop to check electrical connections of the network interface??? Any unmounting instruction is available on the net about how to disassemble the inspiron 8600? I would like to solve this problem without causing damages :)

    Luigi.