I have a WATCHGUARD firewall with a WATCHGUARD Firebox 10gb SPF+ fiber module. I want to connect the FIREWALL to the S4148T!!! Is it possible? I see "10g-4x Breakout for 4 10G interfaces" ports, but I don't see any "10g-1x ports!!! In this case, what can I do?
The 48 ports should already be configured to support 25G or 10g modules. the breakout cables are only for the QSFP ports. fyi, using exclamations as you did in your post is considered to be conveying anger and should be avoided in most conversations, unless that was your intent?
DELL-Rey G
4 Apprentice
•
1068 Posts
0
1
Posted September 23rd, 2024 19:14
The 48 ports should already be configured to support 25G or 10g modules. the breakout cables are only for the QSFP ports. fyi, using exclamations as you did in your post is considered to be conveying anger and should be avoided in most conversations, unless that was your intent?
Rey
#Iwork4Dell